C8×11.5 Channel Dimensions & Properties

C & MC Channels (AISC) · C shapes: American Standard channels

C8×11.5 is an AISC C shapes: American Standard channels channel. It is 8 in (203.2 mm) deep with a 2.26 in (57.4 mm) flange, a 0.22 in (5.6 mm) web and an average flange thickness of 0.39 in (9.9 mm), and weighs 11.5 lb/ft (17.1 kg/m). Area 3.37 in² (2,174 mm²); centroid 0.572 in (14.5 mm) from the back of the web; Ix = 32.5 in⁴ (1,352.8 cm⁴), Sx = 8.14 in³ (133.4 cm³).

dDepth
203.2 mm8 in8 in203.2 mm
bfFlange width
57.4 mm2.26 in2.26 in57.4 mm
twWeb thickness
5.6 mm0.22 in0.22 in5.6 mm
tfFlange thickness (average)
9.9 mm0.39 in0.39 in9.9 mm

Drawing

57.4 mm2.26 in203.2 mm8 intf 9.9 mmtf 0.39 intw 5.6 mmtw 0.22 ine 14.5 mme 0.572 in
Drawn to scale · Dimensions in mmDimensions in inches

C8×11.5 specifications

dDepth8 in203.2 mm
bfFlange width2.26 in57.4 mm
twWeb thickness0.22 in5.6 mm
tfFlange thickness (average)0.39 in9.9 mm
kDesign value0.938 in23.8 mm
kDetailing value15/16 in23.8 mm
WWeight11.5 lb/ft17.1 kg/m
AArea3.37 in²2,174 mm²
x̄Centroid from back of web0.572 in14.5 mm
eoShear centre from web0.697 in17.7 mm
IxMoment of inertia, strong axis32.5 in⁴1,352.8 cm⁴
ZxPlastic modulus, strong axis9.63 in³157.8 cm³
SxSection modulus, strong axis8.14 in³133.4 cm³
rxRadius of gyration, strong axis3.11 in79.0 mm
IyMoment of inertia, weak axis1.31 in⁴54.5 cm⁴
ZyPlastic modulus, weak axis1.57 in³25.7 cm³
SySection modulus, weak axis0.775 in³12.7 cm³
ryRadius of gyration, weak axis0.62 in15.8 mm
JTorsional constant0.13 in⁴5.41 cm⁴
Metric designationC200×17.1

Also known as

C200×17.1

Channels of the same depth in the other series

All C & MC Channels (AISC) sizes

Compare all 72 shapes in the C & MC Channels (AISC) chart →

Sources

  1. AISC Shapes Database v16.0 (2023): C and MC shapes
  2. ASTM A6/A6M: dimensions and tolerances of rolled structural shapes

Values last checked against these sources on November 15, 2026. · How we check data

Reference values for planning and identification. Confirm critical dimensions with the manufacturer's drawing or the current edition of the standard before production.