C8×13.75 Channel Dimensions & Properties

C & MC Channels (AISC) · C shapes: American Standard channels

C8×13.75 is an AISC C shapes: American Standard channels channel. It is 8 in (203.2 mm) deep with a 2.34 in (59.4 mm) flange, a 0.303 in (7.7 mm) web and an average flange thickness of 0.39 in (9.9 mm), and weighs 13.8 lb/ft (20.5 kg/m). Area 4.03 in² (2,600 mm²); centroid 0.554 in (14.1 mm) from the back of the web; Ix = 36.1 in⁴ (1,502.6 cm⁴), Sx = 9.02 in³ (147.8 cm³).

dDepth
203.2 mm8 in8 in203.2 mm
bfFlange width
59.4 mm2.34 in2.34 in59.4 mm
twWeb thickness
7.7 mm0.303 in0.303 in7.7 mm
tfFlange thickness (average)
9.9 mm0.39 in0.39 in9.9 mm

Drawing

59.4 mm2.34 in203.2 mm8 intf 9.9 mmtf 0.39 intw 7.7 mmtw 0.303 ine 14.1 mme 0.554 in
Drawn to scale · Dimensions in mmDimensions in inches

C8×13.75 specifications

dDepth8 in203.2 mm
bfFlange width2.34 in59.4 mm
twWeb thickness0.303 in7.7 mm
tfFlange thickness (average)0.39 in9.9 mm
kDesign value0.938 in23.8 mm
kDetailing value15/16 in23.8 mm
WWeight13.8 lb/ft20.5 kg/m
AArea4.03 in²2,600 mm²
x̄Centroid from back of web0.554 in14.1 mm
eoShear centre from web0.604 in15.3 mm
IxMoment of inertia, strong axis36.1 in⁴1,502.6 cm⁴
ZxPlastic modulus, strong axis11 in³180.3 cm³
SxSection modulus, strong axis9.02 in³147.8 cm³
rxRadius of gyration, strong axis2.99 in75.9 mm
IyMoment of inertia, weak axis1.52 in⁴63.3 cm⁴
ZyPlastic modulus, weak axis1.73 in³28.3 cm³
SySection modulus, weak axis0.848 in³13.9 cm³
ryRadius of gyration, weak axis0.61 in15.6 mm
JTorsional constant0.186 in⁴7.74 cm⁴
Metric designationC200×20.5

Also known as

C200×20.5

Channels of the same depth in the other series

All C & MC Channels (AISC) sizes

Compare all 72 shapes in the C & MC Channels (AISC) chart →

Sources

  1. AISC Shapes Database v16.0 (2023): C and MC shapes
  2. ASTM A6/A6M: dimensions and tolerances of rolled structural shapes

Values last checked against these sources on November 15, 2026. · How we check data

Reference values for planning and identification. Confirm critical dimensions with the manufacturer's drawing or the current edition of the standard before production.