M32 × 1.5 Cable Gland Thread & Hole Size

Cable Glands · Metric M × 1.5 (EN 60423)

A M32 × 1.5 cable gland has a 32 mm (1.260 in) entry thread with 1.5 mm (16.9 TPI) pitch. The table below gives the clearance hole for a gland held by a locknut and the tap drill for a threaded entry.

dThread outside diameter
32 mm1.260 in1.260 in32 mm
PThread pitch
1.5 mm16.9 TPI16.9 TPI1.5 mm
⌀Clearance hole
32.2–32.5 mm1.268–1.280 in1.268–1.280 in32.2–32.5 mm
Cable range, example
9–21 mm0.354–0.827 in0.354–0.827 in9–21 mm

Drawing

⌀32 mm⌀1.260 inpitch 1.5 mm16.9 TPIhole ⌀32.2–32.5 mmhole ⌀1.268–1.280 incable ⌀9–21 mmcable ⌀0.354–0.827 inenclosure wall
Gland with locknut through an enclosure wall. Thread and hole proportional; body and cap nut shape typical.Proportions shown, not to scale · Dimensions in mmDimensions in inches

M32 × 1.5 specifications

dThread outside diameter32 mm1.260 in
PThread pitch1.5 mm16.9 TPI
⌀Clearance hole32.2–32.5 mm1.268–1.280 in
Tap drill (threaded entry)30.5 mm1.201 in
Cable range, example9–21 mm0.354–0.827 in

Also known as

M32

All Cable Glands sizes

Compare all 24 thread sizes in the Cable Glands chart →

Sources

  1. DIN 40430: Steel conduit thread (PG): dimensions, via gewindebohrer.de thread tables
  2. Heyco: PG hub liquid-tight cordgrip, DIN 40430 thread specifications
  3. Newman Tools: PG steel conduit taps per DIN 40430 (tap drill sizes)
  4. LAPP: SKINTOP ST-M cable glands, metric (clamping ranges)
  5. metric-bolt-torque.com: Cable gland sizes and entry holes
  6. Greenlee: Standard round knockout punches (hole sizes per conduit trade size)
  7. ASME B1.20.1: Pipe threads, general purpose (inch), NPT

Values last checked against these sources on November 15, 2026. · How we check data

Reference values for planning and identification. Confirm critical dimensions with the manufacturer's drawing or the current edition of the standard before production.