M40 × 1.5 Cable Gland Thread & Hole Size
Cable Glands · Metric M × 1.5 (EN 60423)
A M40 × 1.5 cable gland has a 40 mm (1.575 in) entry thread with 1.5 mm (16.9 TPI) pitch. The table below gives the clearance hole for a gland held by a locknut and the tap drill for a threaded entry.
- dThread outside diameter
- 40 mm1.575 in1.575 in40 mm
- PThread pitch
- 1.5 mm16.9 TPI16.9 TPI1.5 mm
- ⌀Clearance hole
- 40.2–40.5 mm1.583–1.594 in1.583–1.594 in40.2–40.5 mm
- Cable range, example
- 16–28 mm0.630–1.102 in0.630–1.102 in16–28 mm
Drawing
M40 × 1.5 specifications
| dThread outside diameter | 40 mm1.575 in |
|---|---|
| PThread pitch | 1.5 mm16.9 TPI |
| ⌀Clearance hole | 40.2–40.5 mm1.583–1.594 in |
| Tap drill (threaded entry) | 38.5 mm1.516 in |
| Cable range, example | 16–28 mm0.630–1.102 in |
Also known as
M40
All Cable Glands sizes
Sources
- DIN 40430: Steel conduit thread (PG): dimensions, via gewindebohrer.de thread tables
- Heyco: PG hub liquid-tight cordgrip, DIN 40430 thread specifications
- Newman Tools: PG steel conduit taps per DIN 40430 (tap drill sizes)
- LAPP: SKINTOP ST-M cable glands, metric (clamping ranges)
- metric-bolt-torque.com: Cable gland sizes and entry holes
- Greenlee: Standard round knockout punches (hole sizes per conduit trade size)
- ASME B1.20.1: Pipe threads, general purpose (inch), NPT
Values last checked against these sources on November 15, 2026. · How we check data
Reference values for planning and identification. Confirm critical dimensions with the manufacturer's drawing or the current edition of the standard before production.