M63 × 1.5 Cable Gland Thread & Hole Size

Cable Glands · Metric M × 1.5 (EN 60423)

A M63 × 1.5 cable gland has a 63 mm (2.480 in) entry thread with 1.5 mm (16.9 TPI) pitch. The table below gives the clearance hole for a gland held by a locknut and the tap drill for a threaded entry.

dThread outside diameter
63 mm2.480 in2.480 in63 mm
PThread pitch
1.5 mm16.9 TPI16.9 TPI1.5 mm
⌀Clearance hole
63.2–63.5 mm2.488–2.500 in2.488–2.500 in63.2–63.5 mm
Cable range, example
34–45 mm1.339–1.772 in1.339–1.772 in34–45 mm

Drawing

⌀63 mm⌀2.480 inpitch 1.5 mm16.9 TPIhole ⌀63.2–63.5 mmhole ⌀2.488–2.500 incable ⌀34–45 mmcable ⌀1.339–1.772 inenclosure wall
Gland with locknut through an enclosure wall. Thread and hole proportional; body and cap nut shape typical.Proportions shown, not to scale · Dimensions in mmDimensions in inches

M63 × 1.5 specifications

dThread outside diameter63 mm2.480 in
PThread pitch1.5 mm16.9 TPI
⌀Clearance hole63.2–63.5 mm2.488–2.500 in
Tap drill (threaded entry)61.5 mm2.421 in
Cable range, example34–45 mm1.339–1.772 in

Also known as

M63

All Cable Glands sizes

Compare all 24 thread sizes in the Cable Glands chart →

Sources

  1. DIN 40430: Steel conduit thread (PG): dimensions, via gewindebohrer.de thread tables
  2. Heyco: PG hub liquid-tight cordgrip, DIN 40430 thread specifications
  3. Newman Tools: PG steel conduit taps per DIN 40430 (tap drill sizes)
  4. LAPP: SKINTOP ST-M cable glands, metric (clamping ranges)
  5. metric-bolt-torque.com: Cable gland sizes and entry holes
  6. Greenlee: Standard round knockout punches (hole sizes per conduit trade size)
  7. ASME B1.20.1: Pipe threads, general purpose (inch), NPT

Values last checked against these sources on November 15, 2026. · How we check data

Reference values for planning and identification. Confirm critical dimensions with the manufacturer's drawing or the current edition of the standard before production.