M50 × 1.5 Cable Gland Thread & Hole Size

Cable Glands · Metric M × 1.5 (EN 60423)

A M50 × 1.5 cable gland has a 50 mm (1.969 in) entry thread with 1.5 mm (16.9 TPI) pitch. The table below gives the clearance hole for a gland held by a locknut and the tap drill for a threaded entry.

dThread outside diameter
50 mm1.969 in1.969 in50 mm
PThread pitch
1.5 mm16.9 TPI16.9 TPI1.5 mm
⌀Clearance hole
50.2–50.5 mm1.976–1.988 in1.976–1.988 in50.2–50.5 mm
Cable range, example
27–34 mm1.063–1.339 in1.063–1.339 in27–34 mm

Drawing

⌀50 mm⌀1.969 inpitch 1.5 mm16.9 TPIhole ⌀50.2–50.5 mmhole ⌀1.976–1.988 incable ⌀27–34 mmcable ⌀1.063–1.339 inenclosure wall
Gland with locknut through an enclosure wall. Thread and hole proportional; body and cap nut shape typical.Proportions shown, not to scale · Dimensions in mmDimensions in inches

M50 × 1.5 specifications

dThread outside diameter50 mm1.969 in
PThread pitch1.5 mm16.9 TPI
⌀Clearance hole50.2–50.5 mm1.976–1.988 in
Tap drill (threaded entry)48.5 mm1.909 in
Cable range, example27–34 mm1.063–1.339 in

Also known as

M50

All Cable Glands sizes

Compare all 24 thread sizes in the Cable Glands chart →

Sources

  1. DIN 40430: Steel conduit thread (PG): dimensions, via gewindebohrer.de thread tables
  2. Heyco: PG hub liquid-tight cordgrip, DIN 40430 thread specifications
  3. Newman Tools: PG steel conduit taps per DIN 40430 (tap drill sizes)
  4. LAPP: SKINTOP ST-M cable glands, metric (clamping ranges)
  5. metric-bolt-torque.com: Cable gland sizes and entry holes
  6. Greenlee: Standard round knockout punches (hole sizes per conduit trade size)
  7. ASME B1.20.1: Pipe threads, general purpose (inch), NPT

Values last checked against these sources on November 15, 2026. · How we check data

Reference values for planning and identification. Confirm critical dimensions with the manufacturer's drawing or the current edition of the standard before production.