PG11 Cable Gland Thread & Hole Size

Cable Glands · PG: steel conduit thread (DIN 40430)

A PG11 cable gland has a 18.6 mm (0.732 in) entry thread with 1.411 mm (18.0 TPI) pitch. The table below gives the clearance hole for a gland held by a locknut and the tap drill for a threaded entry.

dThread outside diameter
18.6 mm0.732 in0.732 in18.6 mm
PThread pitch
1.411 mm18.0 TPI18.0 TPI1.411 mm
⌀Clearance hole
18.8–19.1 mm0.740–0.752 in0.740–0.752 in18.8–19.1 mm

Drawing

⌀18.6 mm⌀0.732 inpitch 1.411 mm18.0 TPIhole ⌀18.8–19.1 mmhole ⌀0.740–0.752 inenclosure wall
Gland with locknut through an enclosure wall. Thread and hole proportional; body and cap nut shape typical.Proportions shown, not to scale · Dimensions in mmDimensions in inches

PG11 specifications

dThread outside diameter18.6 mm0.732 in
PThread pitch1.411 mm18.0 TPI
⌀Clearance hole18.8–19.1 mm0.740–0.752 in
Tap drill (threaded entry)17.25 mm0.679 in

All Cable Glands sizes

Compare all 24 thread sizes in the Cable Glands chart →

Sources

  1. DIN 40430: Steel conduit thread (PG): dimensions, via gewindebohrer.de thread tables
  2. Heyco: PG hub liquid-tight cordgrip, DIN 40430 thread specifications
  3. Newman Tools: PG steel conduit taps per DIN 40430 (tap drill sizes)
  4. LAPP: SKINTOP ST-M cable glands, metric (clamping ranges)
  5. metric-bolt-torque.com: Cable gland sizes and entry holes
  6. Greenlee: Standard round knockout punches (hole sizes per conduit trade size)
  7. ASME B1.20.1: Pipe threads, general purpose (inch), NPT

Values last checked against these sources on November 15, 2026. · How we check data

Reference values for planning and identification. Confirm critical dimensions with the manufacturer's drawing or the current edition of the standard before production.