PG21 Cable Gland Thread & Hole Size
Cable Glands · PG: steel conduit thread (DIN 40430)
A PG21 cable gland has a 28.3 mm (1.114 in) entry thread with 1.588 mm (16.0 TPI) pitch. The table below gives the clearance hole for a gland held by a locknut and the tap drill for a threaded entry.
- dThread outside diameter
- 28.3 mm1.114 in1.114 in28.3 mm
- PThread pitch
- 1.588 mm16.0 TPI16.0 TPI1.588 mm
- ⌀Clearance hole
- 28.5–28.8 mm1.122–1.134 in1.122–1.134 in28.5–28.8 mm
Drawing
PG21 specifications
| dThread outside diameter | 28.3 mm1.114 in |
|---|---|
| PThread pitch | 1.588 mm16.0 TPI |
| ⌀Clearance hole | 28.5–28.8 mm1.122–1.134 in |
| Tap drill (threaded entry) | 26.75 mm1.053 in |
All Cable Glands sizes
Sources
- DIN 40430: Steel conduit thread (PG): dimensions, via gewindebohrer.de thread tables
- Heyco: PG hub liquid-tight cordgrip, DIN 40430 thread specifications
- Newman Tools: PG steel conduit taps per DIN 40430 (tap drill sizes)
- LAPP: SKINTOP ST-M cable glands, metric (clamping ranges)
- metric-bolt-torque.com: Cable gland sizes and entry holes
- Greenlee: Standard round knockout punches (hole sizes per conduit trade size)
- ASME B1.20.1: Pipe threads, general purpose (inch), NPT
Values last checked against these sources on November 15, 2026. · How we check data
Reference values for planning and identification. Confirm critical dimensions with the manufacturer's drawing or the current edition of the standard before production.