PG29 Cable Gland Thread & Hole Size

Cable Glands · PG: steel conduit thread (DIN 40430)

A PG29 cable gland has a 37 mm (1.457 in) entry thread with 1.588 mm (16.0 TPI) pitch. The table below gives the clearance hole for a gland held by a locknut and the tap drill for a threaded entry.

dThread outside diameter
37 mm1.457 in1.457 in37 mm
PThread pitch
1.588 mm16.0 TPI16.0 TPI1.588 mm
⌀Clearance hole
37.2–37.5 mm1.465–1.476 in1.465–1.476 in37.2–37.5 mm

Drawing

⌀37 mm⌀1.457 inpitch 1.588 mm16.0 TPIhole ⌀37.2–37.5 mmhole ⌀1.465–1.476 inenclosure wall
Gland with locknut through an enclosure wall. Thread and hole proportional; body and cap nut shape typical.Proportions shown, not to scale · Dimensions in mmDimensions in inches

PG29 specifications

dThread outside diameter37 mm1.457 in
PThread pitch1.588 mm16.0 TPI
⌀Clearance hole37.2–37.5 mm1.465–1.476 in

Tap drill for PG29 is not listed: published values vary (about 35–35.5 mm). Check the tap maker's table.

All Cable Glands sizes

Compare all 24 thread sizes in the Cable Glands chart →

Sources

  1. DIN 40430: Steel conduit thread (PG): dimensions, via gewindebohrer.de thread tables
  2. Heyco: PG hub liquid-tight cordgrip, DIN 40430 thread specifications
  3. Newman Tools: PG steel conduit taps per DIN 40430 (tap drill sizes)
  4. LAPP: SKINTOP ST-M cable glands, metric (clamping ranges)
  5. metric-bolt-torque.com: Cable gland sizes and entry holes
  6. Greenlee: Standard round knockout punches (hole sizes per conduit trade size)
  7. ASME B1.20.1: Pipe threads, general purpose (inch), NPT

Values last checked against these sources on November 15, 2026. · How we check data

Reference values for planning and identification. Confirm critical dimensions with the manufacturer's drawing or the current edition of the standard before production.