200 mm fan: Hole Spacing and Dimensions

Case Fan Sizes

A 200 mm fan has a 200 mm (7.87 in) square frame. Mounting-hole spacing, centre to centre: 154 mm (6.06 in). Common frame thicknesses are 20, 30 mm. Typical use: Large case intake/exhaust (check the case's hole pattern).

AFrame size
200 mm7.87 in7.87 in200 mm
BHole spacing (centre to centre)
154 mm6.06 in6.06 in154 mm

Drawing

154 mm6.06 in154 mm6.06 in200 mm7.87 in
Frame and hole spacing in proportion; blades, hub and hole size indicative.Drawn to scale · Dimensions in mmDimensions in inches

200 mm fan specifications

AFrame size200 mm7.87 in
BHole spacing (centre to centre)154 mm6.06 in
Common thicknesses20, 30 mm
Typical useLarge case intake/exhaust (check the case's hole pattern)

3-pin and 4-pin fan connector pinout

PinSignalFunctionTypical wire colour
1GNDGroundblack
2+12 VSupply (on 3-pin fans the board varies this voltage to control speed)red or yellow
3Sense (tach)Speed signal, 2 pulses per revolutionyellow or green
4PWM control25 kHz PWM speed control (4-pin fans only)blue

Hole patterns of 200 mm fans vary between makers (154 mm is the most common square pattern; some cases use their own square or rectangular patterns). Check the case manual.

Next smaller and larger fan

All fan sizes

All 10 fan sizes in the Case Fan Sizes chart →

Sources

  1. Arctic: Fan mounting hole pattern drawings (40 mm, 120 mm, 140 mm)
  2. Noctua: 120 mm and 140 mm fan mounting (NF-P14 / NF-A14 dual hole pattern)
  3. Intel: 4-Wire Pulse Width Modulation (PWM) Controlled Fans specification, rev. 1.3
  4. Voltcave: How to measure a PC fan's size (fan size vs hole spacing table)
  5. Wikipedia: Computer fan (fan size vs mounting hole spacing table, connectors)

Values last checked against these sources on November 15, 2026. · How we check data

Reference values for planning and identification. Confirm critical dimensions with the manufacturer's drawing or the current edition of the standard before production.