50 mm fan: Hole Spacing and Dimensions
Case Fan Sizes
A 50 mm fan has a 50 mm (1.97 in) square frame. Mounting-hole spacing, centre to centre: 40 mm (1.57 in). Common frame thicknesses are 10, 15 mm. Typical use: Small devices, chipset coolers, 3D printer hot ends.
- AFrame size
- 50 mm1.97 in1.97 in50 mm
- BHole spacing (centre to centre)
- 40 mm1.57 in1.57 in40 mm
Drawing
50 mm fan specifications
| AFrame size | 50 mm1.97 in |
|---|---|
| BHole spacing (centre to centre) | 40 mm1.57 in |
| Common thicknesses | 10, 15 mm |
| Typical use | Small devices, chipset coolers, 3D printer hot ends |
3-pin and 4-pin fan connector pinout
| Pin | Signal | Function | Typical wire colour |
|---|---|---|---|
| 1 | GND | Ground | black |
| 2 | +12 V | Supply (on 3-pin fans the board varies this voltage to control speed) | red or yellow |
| 3 | Sense (tach) | Speed signal, 2 pulses per revolution | yellow or green |
| 4 | PWM control | 25 kHz PWM speed control (4-pin fans only) | blue |
Next smaller and larger fan
All fan sizes
Sources
- Arctic: Fan mounting hole pattern drawings (40 mm, 120 mm, 140 mm)
- Noctua: 120 mm and 140 mm fan mounting (NF-P14 / NF-A14 dual hole pattern)
- Intel: 4-Wire Pulse Width Modulation (PWM) Controlled Fans specification, rev. 1.3
- Voltcave: How to measure a PC fan's size (fan size vs hole spacing table)
- Wikipedia: Computer fan (fan size vs mounting hole spacing table, connectors)
Values last checked against these sources on November 15, 2026. · How we check data
Reference values for planning and identification. Confirm critical dimensions with the manufacturer's drawing or the current edition of the standard before production.