92 mm fan: Hole Spacing and Dimensions
Case Fan Sizes
A 92 mm fan has a 92 mm (3.62 in) square frame. Mounting-hole spacing, centre to centre: 82.5 mm (3.25 in). Common frame thicknesses are 14, 25, 38 mm. Typical use: Compact CPU coolers, small cases, NAS.
- AFrame size
- 92 mm3.62 in3.62 in92 mm
- BHole spacing (centre to centre)
- 82.5 mm3.25 in3.25 in82.5 mm
Drawing
92 mm fan specifications
| AFrame size | 92 mm3.62 in |
|---|---|
| BHole spacing (centre to centre) | 82.5 mm3.25 in |
| Common thicknesses | 14, 25, 38 mm |
| Typical use | Compact CPU coolers, small cases, NAS |
3-pin and 4-pin fan connector pinout
| Pin | Signal | Function | Typical wire colour |
|---|---|---|---|
| 1 | GND | Ground | black |
| 2 | +12 V | Supply (on 3-pin fans the board varies this voltage to control speed) | red or yellow |
| 3 | Sense (tach) | Speed signal, 2 pulses per revolution | yellow or green |
| 4 | PWM control | 25 kHz PWM speed control (4-pin fans only) | blue |
Next smaller and larger fan
All fan sizes
Sources
- Arctic: Fan mounting hole pattern drawings (40 mm, 120 mm, 140 mm)
- Noctua: 120 mm and 140 mm fan mounting (NF-P14 / NF-A14 dual hole pattern)
- Intel: 4-Wire Pulse Width Modulation (PWM) Controlled Fans specification, rev. 1.3
- Voltcave: How to measure a PC fan's size (fan size vs hole spacing table)
- Wikipedia: Computer fan (fan size vs mounting hole spacing table, connectors)
Values last checked against these sources on November 15, 2026. · How we check data
Reference values for planning and identification. Confirm critical dimensions with the manufacturer's drawing or the current edition of the standard before production.