120 mm fan: Hole Spacing and Dimensions

Case Fan Sizes

A 120 mm fan has a 120 mm (4.72 in) square frame. Mounting-hole spacing, centre to centre: 105 mm (4.13 in). Common frame thicknesses are 15, 25, 38 mm. Typical use: Standard case fan, tower CPU coolers, 120/240/360 mm radiators.

AFrame size
120 mm4.72 in4.72 in120 mm
BHole spacing (centre to centre)
105 mm4.13 in4.13 in105 mm

Drawing

105 mm4.13 in105 mm4.13 in120 mm4.72 in
Frame and hole spacing in proportion; blades, hub and hole size indicative.Drawn to scale · Dimensions in mmDimensions in inches

120 mm fan specifications

AFrame size120 mm4.72 in
BHole spacing (centre to centre)105 mm4.13 in
Common thicknesses15, 25, 38 mm
Typical useStandard case fan, tower CPU coolers, 120/240/360 mm radiators

3-pin and 4-pin fan connector pinout

PinSignalFunctionTypical wire colour
1GNDGroundblack
2+12 VSupply (on 3-pin fans the board varies this voltage to control speed)red or yellow
3Sense (tach)Speed signal, 2 pulses per revolutionyellow or green
4PWM control25 kHz PWM speed control (4-pin fans only)blue

The most common PC fan. 120 × 25 mm is the standard; 120 × 15 mm slim fans fit tight spaces under GPUs or in small cases, and 120 × 38 mm fans are used in servers and for high static pressure.

Next smaller and larger fan

All fan sizes

All 10 fan sizes in the Case Fan Sizes chart →

Sources

  1. Arctic: Fan mounting hole pattern drawings (40 mm, 120 mm, 140 mm)
  2. Noctua: 120 mm and 140 mm fan mounting (NF-P14 / NF-A14 dual hole pattern)
  3. Intel: 4-Wire Pulse Width Modulation (PWM) Controlled Fans specification, rev. 1.3
  4. Voltcave: How to measure a PC fan's size (fan size vs hole spacing table)
  5. Wikipedia: Computer fan (fan size vs mounting hole spacing table, connectors)

Values last checked against these sources on November 15, 2026. · How we check data

Reference values for planning and identification. Confirm critical dimensions with the manufacturer's drawing or the current edition of the standard before production.