125×65×15 PFC Channel Dimensions & Properties

Channels (UPN, UPE, PFC, JIS) · PFC: British parallel flange channels (BS 4-1)

125×65×15 PFC (PFC: British parallel flange channels, BS 4-1) is 125 mm (4.921 in) deep with a 65 mm (2.559 in) flange, a 5.5 mm (0.217 in) web and a 9.5 mm (0.374 in) flange. Mass 14.8 kg/m (9.945 lb/ft), area 18.8 cm² (2.914 in²); strong-axis I = 483 cm⁴ (11.6 in⁴), Wel = 77.3 cm³ (4.72 in³).

hDepth
125 mm4.921 in4.921 in125 mm
bFlange width
65 mm2.559 in2.559 in65 mm
twWeb thickness
5.5 mm0.217 in0.217 in5.5 mm
tfFlange thickness
9.5 mm0.374 in0.374 in9.5 mm

Drawing

65 mm2.559 in125 mm4.921 intf 9.5 mmtf 0.374 intw 5.5 mmtw 0.217 ine 2.25 cme 0.886 in
Drawn to scale · Dimensions in mmDimensions in inches

125×65×15 PFC specifications

hDepth125 mm4.921 in
bFlange width65 mm2.559 in
twWeb thickness5.5 mm0.217 in
tfFlange thickness9.5 mm0.374 in
r1Root radius12 mm0.472 in
GMass14.8 kg/m9.945 lb/ft
AArea18.8 cm²2.914 in²
eCentroid from back of web2.25 cm0.886 in
IyMoment of inertia, strong axis483 cm⁴11.6 in⁴
Wel,yElastic modulus, strong axis77.3 cm³4.72 in³
Wpl,yPlastic modulus, strong axis89.9 cm³5.49 in³
iyRadius of gyration, strong axis5.07 cm1.996 in
IzMoment of inertia, weak axis80 cm⁴1.92 in⁴
Wel,zElastic modulus, weak axis18.8 cm³1.15 in³
izRadius of gyration, weak axis2.06 cm0.811 in

Also known as

PFC125x65x15

Channels of about the same depth in other series

All Channels (UPN, UPE, PFC, JIS) sizes

Compare all 58 sections in the Channels (UPN, UPE, PFC, JIS) chart →

Sources

  1. EN 10279:2000, Hot rolled steel channels. Tolerances on shape, dimension and mass
  2. EN 10365:2017, Hot rolled steel channels, I and H sections. Dimensions and masses
  3. ArcelorMittal: Sections and Merchant Bars sales programme, UPN and UPE tables
  4. SCI / BCSA: Steel Building Design: Design Data (Blue Book), parallel flange channels
  5. JIS G 3192:2024 and JFE Steel building steel handbook, channel section table

Values last checked against these sources on November 15, 2026. · How we check data

Reference values for planning and identification. Confirm critical dimensions with the manufacturer's drawing or the current edition of the standard before production.