150×75×18 PFC Channel Dimensions & Properties

Channels (UPN, UPE, PFC, JIS) · PFC: British parallel flange channels (BS 4-1)

150×75×18 PFC (PFC: British parallel flange channels, BS 4-1) is 150 mm (5.906 in) deep with a 75 mm (2.953 in) flange, a 5.5 mm (0.217 in) web and a 10 mm (0.394 in) flange. Mass 17.9 kg/m (12.028 lb/ft), area 22.8 cm² (3.534 in²); strong-axis I = 861 cm⁴ (20.69 in⁴), Wel = 115 cm³ (7.02 in³).

hDepth
150 mm5.906 in5.906 in150 mm
bFlange width
75 mm2.953 in2.953 in75 mm
twWeb thickness
5.5 mm0.217 in0.217 in5.5 mm
tfFlange thickness
10 mm0.394 in0.394 in10 mm

Drawing

75 mm2.953 in150 mm5.906 intf 10 mmtf 0.394 intw 5.5 mmtw 0.217 ine 2.58 cme 1.016 in
Drawn to scale · Dimensions in mmDimensions in inches

150×75×18 PFC specifications

hDepth150 mm5.906 in
bFlange width75 mm2.953 in
twWeb thickness5.5 mm0.217 in
tfFlange thickness10 mm0.394 in
r1Root radius12 mm0.472 in
GMass17.9 kg/m12.028 lb/ft
AArea22.8 cm²3.534 in²
eCentroid from back of web2.58 cm1.016 in
IyMoment of inertia, strong axis861 cm⁴20.69 in⁴
Wel,yElastic modulus, strong axis115 cm³7.02 in³
Wpl,yPlastic modulus, strong axis132 cm³8.06 in³
iyRadius of gyration, strong axis6.15 cm2.421 in
IzMoment of inertia, weak axis131 cm⁴3.15 in⁴
Wel,zElastic modulus, weak axis26.6 cm³1.62 in³
izRadius of gyration, weak axis2.4 cm0.945 in

Also known as

PFC150x75x18

Channels of about the same depth in other series

All Channels (UPN, UPE, PFC, JIS) sizes

Compare all 58 sections in the Channels (UPN, UPE, PFC, JIS) chart →

Sources

  1. EN 10279:2000, Hot rolled steel channels. Tolerances on shape, dimension and mass
  2. EN 10365:2017, Hot rolled steel channels, I and H sections. Dimensions and masses
  3. ArcelorMittal: Sections and Merchant Bars sales programme, UPN and UPE tables
  4. SCI / BCSA: Steel Building Design: Design Data (Blue Book), parallel flange channels
  5. JIS G 3192:2024 and JFE Steel building steel handbook, channel section table

Values last checked against these sources on November 15, 2026. · How we check data

Reference values for planning and identification. Confirm critical dimensions with the manufacturer's drawing or the current edition of the standard before production.