150×90×24 PFC Channel Dimensions & Properties
Channels (UPN, UPE, PFC, JIS) · PFC: British parallel flange channels (BS 4-1)
150×90×24 PFC (PFC: British parallel flange channels, BS 4-1) is 150 mm (5.906 in) deep with a 90 mm (3.543 in) flange, a 6.5 mm (0.256 in) web and a 12 mm (0.472 in) flange. Mass 23.9 kg/m (16.060 lb/ft), area 30.4 cm² (4.712 in²); strong-axis I = 1,160 cm⁴ (27.87 in⁴), Wel = 155 cm³ (9.46 in³).
- hDepth
- 150 mm5.906 in5.906 in150 mm
- bFlange width
- 90 mm3.543 in3.543 in90 mm
- twWeb thickness
- 6.5 mm0.256 in0.256 in6.5 mm
- tfFlange thickness
- 12 mm0.472 in0.472 in12 mm
Drawing
150×90×24 PFC specifications
| hDepth | 150 mm5.906 in |
|---|---|
| bFlange width | 90 mm3.543 in |
| twWeb thickness | 6.5 mm0.256 in |
| tfFlange thickness | 12 mm0.472 in |
| r1Root radius | 12 mm0.472 in |
| GMass | 23.9 kg/m16.060 lb/ft |
| AArea | 30.4 cm²4.712 in² |
| eCentroid from back of web | 3.3 cm1.299 in |
| IyMoment of inertia, strong axis | 1,160 cm⁴27.87 in⁴ |
| Wel,yElastic modulus, strong axis | 155 cm³9.46 in³ |
| Wpl,yPlastic modulus, strong axis | 179 cm³10.92 in³ |
| iyRadius of gyration, strong axis | 6.18 cm2.433 in |
| IzMoment of inertia, weak axis | 253 cm⁴6.08 in⁴ |
| Wel,zElastic modulus, weak axis | 44.4 cm³2.71 in³ |
| izRadius of gyration, weak axis | 2.89 cm1.138 in |
Also known as
PFC150x90x24
Channels of about the same depth in other series
All Channels (UPN, UPE, PFC, JIS) sizes
Compare all 58 sections in the Channels (UPN, UPE, PFC, JIS) chart →
Sources
- EN 10279:2000, Hot rolled steel channels. Tolerances on shape, dimension and mass
- EN 10365:2017, Hot rolled steel channels, I and H sections. Dimensions and masses
- ArcelorMittal: Sections and Merchant Bars sales programme, UPN and UPE tables
- SCI / BCSA: Steel Building Design: Design Data (Blue Book), parallel flange channels
- JIS G 3192:2024 and JFE Steel building steel handbook, channel section table
Values last checked against these sources on November 15, 2026. · How we check data
Reference values for planning and identification. Confirm critical dimensions with the manufacturer's drawing or the current edition of the standard before production.