180×75×20 PFC Channel Dimensions & Properties

Channels (UPN, UPE, PFC, JIS) · PFC: British parallel flange channels (BS 4-1)

180×75×20 PFC (PFC: British parallel flange channels, BS 4-1) is 180 mm (7.087 in) deep with a 75 mm (2.953 in) flange, a 6 mm (0.236 in) web and a 10.5 mm (0.413 in) flange. Mass 20.3 kg/m (13.641 lb/ft), area 25.9 cm² (4.015 in²); strong-axis I = 1,370 cm⁴ (32.91 in⁴), Wel = 152 cm³ (9.28 in³).

hDepth
180 mm7.087 in7.087 in180 mm
bFlange width
75 mm2.953 in2.953 in75 mm
twWeb thickness
6 mm0.236 in0.236 in6 mm
tfFlange thickness
10.5 mm0.413 in0.413 in10.5 mm

Drawing

75 mm2.953 in180 mm7.087 intf 10.5 mmtf 0.413 intw 6 mmtw 0.236 ine 2.41 cme 0.949 in
Drawn to scale · Dimensions in mmDimensions in inches

180×75×20 PFC specifications

hDepth180 mm7.087 in
bFlange width75 mm2.953 in
twWeb thickness6 mm0.236 in
tfFlange thickness10.5 mm0.413 in
r1Root radius12 mm0.472 in
GMass20.3 kg/m13.641 lb/ft
AArea25.9 cm²4.015 in²
eCentroid from back of web2.41 cm0.949 in
IyMoment of inertia, strong axis1,370 cm⁴32.91 in⁴
Wel,yElastic modulus, strong axis152 cm³9.28 in³
Wpl,yPlastic modulus, strong axis176 cm³10.74 in³
iyRadius of gyration, strong axis7.27 cm2.862 in
IzMoment of inertia, weak axis146 cm⁴3.51 in⁴
Wel,zElastic modulus, weak axis28.8 cm³1.76 in³
izRadius of gyration, weak axis2.38 cm0.937 in

Also known as

PFC180x75x20

Channels of about the same depth in other series

All Channels (UPN, UPE, PFC, JIS) sizes

Compare all 58 sections in the Channels (UPN, UPE, PFC, JIS) chart →

Sources

  1. EN 10279:2000, Hot rolled steel channels. Tolerances on shape, dimension and mass
  2. EN 10365:2017, Hot rolled steel channels, I and H sections. Dimensions and masses
  3. ArcelorMittal: Sections and Merchant Bars sales programme, UPN and UPE tables
  4. SCI / BCSA: Steel Building Design: Design Data (Blue Book), parallel flange channels
  5. JIS G 3192:2024 and JFE Steel building steel handbook, channel section table

Values last checked against these sources on November 15, 2026. · How we check data

Reference values for planning and identification. Confirm critical dimensions with the manufacturer's drawing or the current edition of the standard before production.