Concrete Block (CMU) Size Chart: Nominal vs Actual
Actual dimensions of standard concrete blocks (CMU) and how many go into a wall. Blocks are named by nominal size including one 3/8-in joint, so an 8×8×16 block actually measures 7-5/8 × 7-5/8 × 15-5/8 in (194 × 194 × 397 mm).
Size chartTap a size for its drawing and full specs
| Block | WWidthmminmm · in | HHeightmminmm · in | LLengthmminmm · in | Nominal / coordinating size | Blocks per m² of wall | Blocks per 100 ft² of wall |
|---|---|---|---|---|---|---|
| US CMU (ASTM C90), nominal W × H × L in | ||||||
| 4×8×16 | 92.13 5/8 | 193.77 5/8 | 396.915 5/8 | 4 × 8 × 16 in | 12.11 | 112.5 |
| 6×8×16 | 142.95 5/8 | 193.77 5/8 | 396.915 5/8 | 6 × 8 × 16 in | 12.11 | 112.5 |
| 8×8×16 | 193.77 5/8 | 193.77 5/8 | 396.915 5/8 | 8 × 8 × 16 in | 12.11 | 112.5 |
| 10×8×16 | 244.59 5/8 | 193.77 5/8 | 396.915 5/8 | 10 × 8 × 16 in | 12.11 | 112.5 |
| 12×8×16 | 295.311 5/8 | 193.77 5/8 | 396.915 5/8 | 12 × 8 × 16 in | 12.11 | 112.5 |
| 8×4×16 | 193.77 5/8 | 92.13 5/8 | 396.915 5/8 | 8 × 4 × 16 in | 24.22 | 225 |
| 8×8×8 | 193.77 5/8 | 193.77 5/8 | 193.77 5/8 | 8 × 8 × 8 in | 24.22 | 225 |
| UK aggregate blocks (BS EN 771-3) | ||||||
| UK 75 mm (440 × 215) | 752.953 | 2158.465 | 44017.323 | 450 × 225 × 75 mm | 9.88 | 91.8 |
| UK 100 mm (440 × 215) | 1003.937 | 2158.465 | 44017.323 | 450 × 225 × 100 mm | 9.88 | 91.8 |
| UK 140 mm (440 × 215) | 1405.512 | 2158.465 | 44017.323 | 450 × 225 × 140 mm | 9.88 | 91.8 |
| UK 190 mm (440 × 215) | 1907.48 | 2158.465 | 44017.323 | 450 × 225 × 190 mm | 9.88 | 91.8 |
| Korea (KS F 4002) | ||||||
| KS 100 mm (390 × 190) | 1003.937 | 1907.48 | 39015.354 | 400 × 200 × 100 mm | 12.5 | 116.1 |
| KS 150 mm (390 × 190) | 1505.906 | 1907.48 | 39015.354 | 400 × 200 × 150 mm | 12.5 | 116.1 |
| KS 190 mm (390 × 190) | 1907.48 | 1907.48 | 39015.354 | 400 × 200 × 190 mm | 12.5 | 116.1 |
| Japan (JIS A 5406) | ||||||
| JIS 100 mm (390 × 190) | 1003.937 | 1907.48 | 39015.354 | 400 × 200 × 100 mm | 12.5 | 116.1 |
| JIS 120 mm (390 × 190) | 1204.724 | 1907.48 | 39015.354 | 400 × 200 × 120 mm | 12.5 | 116.1 |
| JIS 150 mm (390 × 190) | 1505.906 | 1907.48 | 39015.354 | 400 × 200 × 150 mm | 12.5 | 116.1 |
| JIS 190 mm (390 × 190) | 1907.48 | 1907.48 | 39015.354 | 400 × 200 × 190 mm | 12.5 | 116.1 |
| Australia (400 × 200 mm module) | ||||||
| 10.01 (90 mm) | 903.543 | 1907.48 | 39015.354 | 400 × 200 × 90 mm | 12.5 | 116.1 |
| 15.01 (140 mm) | 1405.512 | 1907.48 | 39015.354 | 400 × 200 × 140 mm | 12.5 | 116.1 |
| 20.01 (190 mm) | 1907.48 | 1907.48 | 39015.354 | 400 × 200 × 190 mm | 12.5 | 116.1 |
No exact match. The nearest sizes:
Nominal and actual size
US blocks are called by nominal width × height × length in inches. Each specified dimension is 3/8 in less, the thickness of the mortar joint, so the wall lands on the 8-in grid: 8×8×16 → 7-5/8 × 7-5/8 × 15-5/8 in. ASTM C90 allows ±1/8 in.
Width is what changes between 4, 6, 8, 10 and 12-in blocks; the face (8 × 16 in nominal) stays the same, so every size lays 112.5 blocks per 100 ft².
Metric blocks are named by the work size. The UK block face is 440 × 215 mm (450 × 225 mm with 10-mm joints, 9.88 per m²); Korea, Japan and Australia use 390 × 190 mm (400 × 200 mm module, 12.5 per m²).
About Concrete Block Sizes
Courses: three courses of modular brick equal one 8-in block course, and the 16-in block length equals two modular bricks. That is why brick veneer over block backup lines up without cutting.
"Cinder block" is the old name for blocks made with cinder (coal ash) aggregate. Today's CMU uses sand and gravel (normal weight) or expanded shale, clay or slag (lightweight); the dimensions are the same.
Weights vary with aggregate and core design (a lightweight 8×8×16 can be a quarter lighter than a normal-weight one), so the chart gives none. Check the producer's data sheet for structural and fire calculations.
Special shapes (bond beam, lintel, open-end, bullnose, pilaster, half-high and half-length) share the face dimensions of the stretcher unit. Ask the supplier which shapes they stock before detailing.
Quantities for a wall
Multiply the wall area by the blocks per area and add about 5 % for cuts and breakage.
| Block face | Module with joint | Per m² | Per 100 ft² |
|---|---|---|---|
| 8 × 16 in nominal (US) | 203 × 406 mm | 12.1 | 112.5 |
| 440 × 215 mm (UK) | 450 × 225 mm | 9.88 | 91.8 |
| 390 × 190 mm (KR, JP, AU) | 400 × 200 mm | 12.5 | 116.1 |
Questions
What are the actual dimensions of an 8x8x16 block?
7-5/8 × 7-5/8 × 15-5/8 in (194 × 194 × 397 mm). The 3/8-in difference is the mortar joint.
How many concrete blocks are in 100 square feet?
112.5 standard 8 × 16 in face blocks (1.125 per ft²), regardless of width. Add about 5 % for waste.
What is the actual width of a 4, 6, 10 and 12 inch block?
3-5/8, 5-5/8, 9-5/8 and 11-5/8 in. Height and length stay 7-5/8 × 15-5/8 in.
What size is a standard UK concrete block?
440 × 215 mm face, usually 100 mm thick (also 75, 140, 190 mm). With 10-mm joints that is 9.88 blocks per m².
What size are concrete blocks in Korea and Japan?
390 × 190 mm face, 100, 150 or 190 mm thick (KS F 4002); Japan also has 120 mm (JIS A 5406). With joints, 12.5 blocks per m².
Sources
- ASTM C90: Standard Specification for Loadbearing Concrete Masonry Units
- NCMA TEK 14-1B: Section properties of concrete masonry walls (nominal and specified dimensions)
- Angelus Block: CMU basics: dimensions and sizes
- Stowell Concrete: dense concrete blocks to BS EN 771-3 (440 × 215 mm, 75/100/140/190 mm)
- KS F 4002: Hollow concrete blocks (Korea); JIS A 5406: Concrete blocks for building (Japan)
- Concrete Masonry Association of Australia: block sizes on the 400 × 200 mm module
Values last checked against these sources on November 15, 2026. · How we check data
Reference values for planning and identification. Confirm critical dimensions with the manufacturer's drawing or the current edition of the standard before production.