DE-9 RS-232 (DB9) Pinout
Connector Pinouts · Network and serial
The DE-9 RS-232 (DB9) has 9 contacts. Specification: TIA-574 (DE-9 for EIA/TIA-232). The drawing shows the connector face with every pin colour-coded by function; the table below lists each pin's signal and description.
- Pins
- 9
Drawing
DE-9 RS-232 (DB9) specifications
| Pins | 9 |
|---|---|
| Standard | TIA-574 (DE-9 for EIA/TIA-232) |
| Contact pitch | 2.77 mm0.109 in |
| Max. data rate | 115.2 kbit/s typical maximum on PCs |
| Power | Signal levels ±3 to ±15 V |
| Drawing view | Male connector on the PC (DTE), front view |
DE-9 RS-232 (DB9) pin assignment
| Pin | Signal | Function | Wire |
|---|---|---|---|
| 1 | DCD | Data Carrier Detect (input) | |
| 2 | RXD | Received Data (input) | |
| 3 | TXD | Transmitted Data (output) | |
| 4 | DTR | Data Terminal Ready (output) | |
| 5 | GND | Signal ground | |
| 6 | DSR | Data Set Ready (input) | |
| 7 | RTS | Request To Send (output) | |
| 8 | CTS | Clear To Send (input) | |
| 9 | RI | Ring Indicator (input) |
This is the male connector on a PC or other DTE, seen from the front: pins 1–5 in the top row from left to right, 6–9 below. A modem or other DCE has a female connector with the same pin functions. A null-modem cable crosses TXD/RXD (2↔3), RTS/CTS (7↔8) and DTR/DSR+DCD for connecting two DTEs. The connector is properly called DE-9; "DB9" is a common misnomer.
Also known as
All connector pinouts
Sources
- USB-IF: USB Type-C Cable and Connector Specification, Release 2.x
- USB-IF: Universal Serial Bus 2.0 / 3.2 Specifications
- HDMI Licensing Administrator: HDMI Specification 2.1 (connector and pin assignment)
- VESA: DisplayPort Standard
- ANSI/TIA-568: Commercial Building Telecommunications Cabling Standard (T568A/T568B)
- Intel: ATX Version 3.1 Multi Rail Desktop Platform Power Supply Design Guide
- PCI-SIG: PCI Express Card Electromechanical Specification 5.1
- NVIDIA: Power guidelines for professional GPUs (PCIe 6/8-pin pinout, DA-07261)
- SATA-IO: Serial ATA Revision 3.x
- Apple Lightning pin assignment (reverse engineered): nyansatan.github.io/lightning
Values last checked against these sources on November 15, 2026. · How we check data
Reference values for planning and identification. Confirm critical dimensions with the manufacturer's drawing or the current edition of the standard before production.