RJ11 / RJ14 (6P4C) Pinout
Connector Pinouts · Network and serial
The RJ11 / RJ14 (6P4C) has 6 contacts. Specification: USOC RJ11 (6P2C, one line) / RJ14 (6P4C, two lines); FCC 47 CFR Part 68. The drawing shows the connector face with every pin colour-coded by function; the table below lists each pin's signal and description.
- Pins
- 6
Drawing
RJ11 / RJ14 (6P4C) specifications
| Pins | 6 |
|---|---|
| Standard | USOC RJ11 (6P2C, one line) / RJ14 (6P4C, two lines); FCC 47 CFR Part 68 |
| Contact pitch | 1.02 mm0.040 in |
| Drawing view | Plug, contacts facing you, latch away |
RJ11 / RJ14 (6P4C) pin assignment
| Pin | Signal | Function | Wire |
|---|---|---|---|
| 1 | — | Not connected (line 3 on RJ25) | |
| 2 | T2 | Line 2 tip (RJ14) | black |
| 3 | R1 | Line 1 ring | red |
| 4 | T1 | Line 1 tip | green |
| 5 | R2 | Line 2 ring (RJ14) | yellow |
| 6 | — | Not connected (line 3 on RJ25) |
The 6-position modular plug used for phones. A single-line RJ11 cable uses only the centre pair: pin 3 ring (red) and pin 4 tip (green). RJ14 adds line 2 on pins 2 (tip, black) and 5 (ring, yellow). An RJ11 plug fits an RJ45 jack and makes contact with pins 2–7 there, which is why phone lines can share structured Ethernet cabling.
Also known as
All connector pinouts
Sources
- USB-IF: USB Type-C Cable and Connector Specification, Release 2.x
- USB-IF: Universal Serial Bus 2.0 / 3.2 Specifications
- HDMI Licensing Administrator: HDMI Specification 2.1 (connector and pin assignment)
- VESA: DisplayPort Standard
- ANSI/TIA-568: Commercial Building Telecommunications Cabling Standard (T568A/T568B)
- Intel: ATX Version 3.1 Multi Rail Desktop Platform Power Supply Design Guide
- PCI-SIG: PCI Express Card Electromechanical Specification 5.1
- NVIDIA: Power guidelines for professional GPUs (PCIe 6/8-pin pinout, DA-07261)
- SATA-IO: Serial ATA Revision 3.x
- Apple Lightning pin assignment (reverse engineered): nyansatan.github.io/lightning
Values last checked against these sources on November 15, 2026. · How we check data
Reference values for planning and identification. Confirm critical dimensions with the manufacturer's drawing or the current edition of the standard before production.