DisplayPort Pinout
Connector Pinouts · Video
The DisplayPort has 20 contacts. Specification: VESA DisplayPort Standard. The drawing shows the connector face with every pin colour-coded by function; the table below lists each pin's signal and description.
- Pins
- 20
Drawing
DisplayPort specifications
| Pins | 20 |
|---|---|
| Standard | VESA DisplayPort Standard |
| Max. data rate | 80 Gbit/s (DP 2.1 UHBR20); 32.4 Gbit/s (DP 1.4 HBR3) |
| Power | DP_PWR 3.3 V, 500 mA |
| Drawing view | Source-side assignment, schematic pin order |
DisplayPort pin assignment
| Pin | Signal | Function | Wire |
|---|---|---|---|
| 1 | ML_Lane 0+ | Main link lane 0, positive | |
| 2 | GND | Ground | |
| 3 | ML_Lane 0− | Main link lane 0, negative | |
| 4 | ML_Lane 1+ | Main link lane 1, positive | |
| 5 | GND | Ground | |
| 6 | ML_Lane 1− | Main link lane 1, negative | |
| 7 | ML_Lane 2+ | Main link lane 2, positive | |
| 8 | GND | Ground | |
| 9 | ML_Lane 2− | Main link lane 2, negative | |
| 10 | ML_Lane 3+ | Main link lane 3, positive | |
| 11 | GND | Ground | |
| 12 | ML_Lane 3− | Main link lane 3, negative | |
| 13 | CONFIG1 | Grounded on a DP source; cable-adaptor detect on dual-mode (DP++) ports | |
| 14 | CONFIG2 | Grounded on a DP source; CEC on dual-mode (DP++) ports | |
| 15 | AUX CH+ | Auxiliary channel, positive (link training, EDID, DPCD) | |
| 16 | GND | Ground | |
| 17 | AUX CH− | Auxiliary channel, negative | |
| 18 | Hot Plug Detect | Hot plug detect / interrupt from the sink | |
| 19 | Return | Return for DP_PWR | |
| 20 | DP_PWR | +3.3 V, 500 mA for adapters |
This is the source-side assignment (the port on a graphics card or laptop). On the sink (monitor) side the lane order is reversed: lane 3 is on pins 1/3 and lane 0 on pins 10/12; the cable does the crossover. DP_PWR (pin 20) supplies 3.3 V for active adapters. A cable that connects pin 20 at both ends can back-feed power between devices, which certified cables avoid by leaving it unconnected.
Related connectors
All connector pinouts
Sources
- USB-IF: USB Type-C Cable and Connector Specification, Release 2.x
- USB-IF: Universal Serial Bus 2.0 / 3.2 Specifications
- HDMI Licensing Administrator: HDMI Specification 2.1 (connector and pin assignment)
- VESA: DisplayPort Standard
- ANSI/TIA-568: Commercial Building Telecommunications Cabling Standard (T568A/T568B)
- Intel: ATX Version 3.1 Multi Rail Desktop Platform Power Supply Design Guide
- PCI-SIG: PCI Express Card Electromechanical Specification 5.1
- NVIDIA: Power guidelines for professional GPUs (PCIe 6/8-pin pinout, DA-07261)
- SATA-IO: Serial ATA Revision 3.x
- Apple Lightning pin assignment (reverse engineered): nyansatan.github.io/lightning
Values last checked against these sources on November 15, 2026. · How we check data
Reference values for planning and identification. Confirm critical dimensions with the manufacturer's drawing or the current edition of the standard before production.