3.5 mm TRRS (CTIA) Pinout

Connector Pinouts · Audio

The 3.5 mm TRRS (CTIA) has 4 contacts. Specification: CTIA / AHJ (American Headset Jack). The drawing shows the connector face with every pin colour-coded by function; the table below lists each pin's signal and description.

Pins
4

Drawing

S · MicSMicR2 · GroundR2GroundR1 · RightR1RightT · LeftTLeftGroundAudio
Plug, side view: sleeve at the left, tip at the right.Proportions shown, not to scale

3.5 mm TRRS (CTIA) specifications

Pins4
StandardCTIA / AHJ (American Headset Jack)
Plug diameter3.5 mm0.138 in
Drawing viewPlug, side view

3.5 mm TRRS (CTIA) pin assignment

PinSignalFunctionWire
TLeftTip: left channel
R1RightFirst ring: right channel
R2GroundSecond ring: common ground
SMicSleeve: microphone

The headset standard used by Apple, Samsung, Google and nearly every phone and laptop since the early 2010s: tip left, ring 1 right, ring 2 ground, sleeve microphone. A CTIA headset in an OMTP socket gives thin audio with the voices missing (left and right are heard only as their difference) until the microphone button is held.

Also known as

CTIAAHJ

Related connectors

All connector pinouts

All 26 connectors in the Connector Pinouts chart →

Sources

  1. USB-IF: USB Type-C Cable and Connector Specification, Release 2.x
  2. USB-IF: Universal Serial Bus 2.0 / 3.2 Specifications
  3. HDMI Licensing Administrator: HDMI Specification 2.1 (connector and pin assignment)
  4. VESA: DisplayPort Standard
  5. ANSI/TIA-568: Commercial Building Telecommunications Cabling Standard (T568A/T568B)
  6. Intel: ATX Version 3.1 Multi Rail Desktop Platform Power Supply Design Guide
  7. PCI-SIG: PCI Express Card Electromechanical Specification 5.1
  8. NVIDIA: Power guidelines for professional GPUs (PCIe 6/8-pin pinout, DA-07261)
  9. SATA-IO: Serial ATA Revision 3.x
  10. Apple Lightning pin assignment (reverse engineered): nyansatan.github.io/lightning

Values last checked against these sources on November 15, 2026. · How we check data

Reference values for planning and identification. Confirm critical dimensions with the manufacturer's drawing or the current edition of the standard before production.