3.5 mm TRRS (OMTP) Pinout

Connector Pinouts · Audio

The 3.5 mm TRRS (OMTP) has 4 contacts. Specification: OMTP (Open Mobile Terminal Platform). The drawing shows the connector face with every pin colour-coded by function; the table below lists each pin's signal and description.

Pins
4

Drawing

S · GroundSGroundR2 · MicR2MicR1 · RightR1RightT · LeftTLeftGroundAudio
Plug, side view: sleeve at the left, tip at the right.Proportions shown, not to scale

3.5 mm TRRS (OMTP) specifications

Pins4
StandardOMTP (Open Mobile Terminal Platform)
Plug diameter3.5 mm0.138 in
Drawing viewPlug, side view

3.5 mm TRRS (OMTP) pin assignment

PinSignalFunctionWire
TLeftTip: left channel
R1RightFirst ring: right channel
R2MicSecond ring: microphone
SGroundSleeve: common ground

OMTP puts the microphone on ring 2 and ground on the sleeve, the reverse of CTIA. It was used by older Nokia and Sony Ericsson phones and some early Android phones. Adapters that swap the last two contacts convert between the two.

Also known as

OMTP

Related connectors

All connector pinouts

All 26 connectors in the Connector Pinouts chart →

Sources

  1. USB-IF: USB Type-C Cable and Connector Specification, Release 2.x
  2. USB-IF: Universal Serial Bus 2.0 / 3.2 Specifications
  3. HDMI Licensing Administrator: HDMI Specification 2.1 (connector and pin assignment)
  4. VESA: DisplayPort Standard
  5. ANSI/TIA-568: Commercial Building Telecommunications Cabling Standard (T568A/T568B)
  6. Intel: ATX Version 3.1 Multi Rail Desktop Platform Power Supply Design Guide
  7. PCI-SIG: PCI Express Card Electromechanical Specification 5.1
  8. NVIDIA: Power guidelines for professional GPUs (PCIe 6/8-pin pinout, DA-07261)
  9. SATA-IO: Serial ATA Revision 3.x
  10. Apple Lightning pin assignment (reverse engineered): nyansatan.github.io/lightning

Values last checked against these sources on November 15, 2026. · How we check data

Reference values for planning and identification. Confirm critical dimensions with the manufacturer's drawing or the current edition of the standard before production.