M6 Countersunk Screw Dimensions

Countersunk Screws

Head dimensions of the M6 countersunk screw (90° head) in each standard that covers this size: hex socket ISO 10642 and DIN 7991, cross recessed ISO 7046 and DIN 965. A value that is missing below does not exist for M6 in that standard. The hex socket versions start at M3, the cross recessed ones end at M10.

dkHead dia. ISO 10642 (theor. max)
13.44 mm0.5291 in0.5291 in13.44 mm
kHead height ISO 10642 (max)
3.72 mm0.1465 in0.1465 in3.72 mm
sHex key ISO 10642 / DIN 7991
4 mm0.157 in0.157 in4 mm
Head dia. ISO 7046 (max)
11.3 mm0.445 in0.445 in11.3 mm

Drawing

⌀13.44 mm⌀0.5291 in3.72 mm0.1465 inM690°
s 4 mms 0.157 in
ISO 10642 hex socket head shownDrawn to scale · Dimensions in mmDimensions in inches

M6 specifications

dMajor diameter6 mm0.236 in
PPitch1 mm0.0394 in
dkHead dia. ISO 10642 (theor. max)13.44 mm0.5291 in
Head dia. ISO 10642 (actual min)11.34 mm0.4465 in
kHead height ISO 10642 (max)3.72 mm0.1465 in
sHex key ISO 10642 / DIN 79914 mm0.157 in
Head dia. DIN 799112 mm0.472 in
Head height DIN 79913.3 mm0.1299 in
Head dia. ISO 7046 (max)11.3 mm0.445 in
Head height ISO 7046 (max)3.3 mm0.1299 in
Cross recess ISO 7046PH3 / PZ3
Head dia. DIN 96511 mm0.433 in
Head height DIN 9653 mm0.1181 in

The most common confusion: DIN 7991 M6 has a 12 mm head, ISO 10642 M6 up to 13.44 mm (theoretical). Both take a 4 mm hex key.

Also known as

M6x1

Hex key for the M6

M6 in other charts

All Countersunk Screws sizes

Compare all 13 sizes in the Countersunk Screws chart →

Sources

  1. ISO 10642:2019, Hexagon socket countersunk head screws with reduced loadability
  2. ISO 7046-1:2011, Cross-recessed countersunk flat head screws (common head), steel 4.8
  3. Westfield Fasteners: ISO 10642 / DIN 7991 socket countersunk screw dimensions
  4. fasten.it: DIN EN ISO 7046-1 and DIN 965 dimension tables
  5. Böllhoff: DIN 965 stainless A4 cross recess, product data sheet

Values last checked against these sources on November 15, 2026. · How we check data

Reference values for planning and identification. Confirm critical dimensions with the manufacturer's drawing or the current edition of the standard before production.