M6 Thread Size: Pitch, Tap Drill and Clearance Hole

Metric Threads

M6 is a metric thread with a major diameter of 6 mm (0.236 in) and a coarse pitch of 1 mm (25.4 TPI). Drill 5 mm (0.197 in) before tapping the coarse thread; the common fine thread is M6 × 0.75 mm, tapped with a 5.25 mm drill. For a bolt to pass through, drill a 6.6 mm (0.260 in) clearance hole (ISO 273 medium).

PCoarse pitch
1 mm25.4 TPI25.4 TPI1 mm
Tap drill, coarse
5 mm0.197 in0.197 in5 mm
Clearance hole, medium
6.6 mm0.260 in0.260 in6.6 mm
d₃Minor diameter, bolt
4.773 mm0.1879 in0.1879 in4.773 mm

Drawing

⌀6 mm⌀0.236 in⌀4.773 mm⌀0.1879 inP 1 mmP 25.4 TPI
P 1 mmP 25.4 TPI0.541 mm0.0213 inH₁60°
Side view at true pitch; basic 60° profile enlarged.Drawn to scale · Dimensions in mmDimensions in inches

M6 specifications

dMajor diameter6 mm0.236 in
PCoarse pitch1 mm25.4 TPI
Fine pitch (common)0.75 mm33.9 TPI
Fine pitches (ISO 261)0.75
Tap drill, coarse5 mm0.197 in
Tap drill, fine5.25 mm0.207 in
d₂Pitch diameter5.350 mm0.2106 in
D₁Minor diameter, nut4.917 mm0.1936 in
d₃Minor diameter, bolt4.773 mm0.1879 in
Clearance hole, fine6.4 mm0.252 in
Clearance hole, medium6.6 mm0.260 in
Clearance hole, coarse7 mm0.276 in
ISO 261 size choice1st choice (preferred)

M6 × 1 is the metric counterpart of 1/4″-20. The 1/4″ bolt is 0.35 mm larger with 1.27 mm pitch; forcing one into the other strips the thread.

Also known as

M6x1M6x0.75

Drill sizes for tapping M6

M6 in other charts

All Metric Threads sizes

Compare all 33 sizes in the Metric Threads chart →

Sources

  1. ISO 261:1998, ISO general purpose metric screw threads, general plan
  2. ISO 262:1998, ISO general purpose metric screw threads, selected sizes for screws, bolts and nuts
  3. ISO 724:1993, ISO general-purpose metric screw threads, basic dimensions
  4. ISO 273:1979, Fasteners, clearance holes for bolts and screws
  5. Engineering Hardware / isocnc / mechcodex: ISO 273 clearance hole tables (cross-check)
  6. DIN 336: Drill diameters for tapping holes (tap drill sizes)

Values last checked against these sources on November 15, 2026. · How we check data

Reference values for planning and identification. Confirm critical dimensions with the manufacturer's drawing or the current edition of the standard before production.