N313 Cylindrical Roller Bearing Dimensions
Cylindrical Roller Bearings · 3 series (NU 3xx), medium
The N313 is a single row cylindrical roller bearing, type N: inner ring ribs (3 series, NU 3xx, medium): 65 mm (2.559 in) bore, 140 mm (5.512 in) outside diameter, 33 mm (1.299 in) wide.
- dBore diameter
- 65 mm2.559 in2.559 in65 mm
- DOutside diameter
- 140 mm5.512 in5.512 in140 mm
- BWidth
- 33 mm1.299 in1.299 in33 mm
- ERaceway diameter, outer ring (E)
- 124.5 mm4.902 in4.902 in124.5 mm
Drawing
N313 specifications
| Type | N: inner ring ribs |
|---|---|
| dBore diameter | 65 mm2.559 in |
| DOutside diameter | 140 mm5.512 in |
| BWidth | 33 mm1.299 in |
| ERaceway diameter, outer ring (E) | 124.5 mm4.902 in |
Also known as
N313EN313ECN313ECPN313ECJN313ECMN313-E-XL-TVP2N313-E-XL-M1N313EWN313ETN313EGN313ETVP2N313M
Same size in the other types
Same type, other series with a 65 mm bore
Same 65 mm bore in other bearing types
6013Ball Bearings6213Ball Bearings6313Ball Bearings7013Angular Contact Bearings7213Angular Contact Bearings7313Angular Contact Bearings30213Tapered Roller Bearings30313Tapered Roller Bearings31313Tapered Roller Bearings21313Spherical Roller Bearings22213Spherical Roller Bearings22313Spherical Roller Bearings1213Self-Aligning Ball Bearings1313Self-Aligning Ball Bearings2213Self-Aligning Ball Bearings51113Thrust Ball Bearings51213Thrust Ball Bearings51313Thrust Ball BearingsNA4913Needle Roller BearingsUC213Bearing Units (UCP, UCF, UCFL)
All Cylindrical Roller Bearings sizes
Compare all 238 sizes in the Cylindrical Roller Bearings chart →
Sources
- ISO 15:2017, Rolling bearings, radial bearings, boundary dimensions, general plan
- DIN 5412-1: Cylindrical roller bearings, single row (NU, NJ, NUP, N)
- SKF: Single row cylindrical roller bearings, product tables (NU 2.. ECP, NJ 3.. ECP …)
- Schaeffler (FAG) medias: NU2..-E-XL, NJ3..-E-XL, N2..-E-XL (raceway diameters E, F)
Values last checked against these sources on November 15, 2026. · How we check data
Reference values for planning and identification. Confirm critical dimensions with the manufacturer's drawing or the current edition of the standard before production.