Cat7 Cable Specifications

Ethernet Cable Categories

Cat7 twisted-pair cable is specified up to 600 MHz and carries up to 10 Gbit/s over a 100 m (328 ft) channel. ISO/IEC 11801: Class F. Typical construction: 22–24 AWG, S/FTP.

Bandwidth
600 MHz
Max. speed (full channel)
10 Gbit/s
Channel length
100 m328 ft328 ft100 m

Drawing

Cat7 · typical: S/FTPoverall braid + foil around each pair
Cross-section; colors show the four pairs.Schematic, not to scale

Cat7 specifications

Bandwidth600 MHz
Max. speed (full channel)10 Gbit/s
Channel length100 m328 ft
10GBASE-T reach100 m328 ft
ISO/IEC 11801 classClass F
TIA standardnot recognised by TIA
Typical conductor22–24 AWG
Typical shieldingS/FTP
ConnectorGG45, TERA (RJ45 limits it to Cat6A)
Typical use10GBASE-T

Cat7 is an ISO-only category (Class F, 600 MHz) built as S/FTP. It is not recognised by TIA. With RJ45 connectors the link can only be certified to Cat6A; the full rating needs GG45 or TERA connectors. Many cheap "Cat7" patch cords are Cat6A-grade at best.

Neighbouring categories

All Ethernet Cable Categories sizes

Compare all 9 sizes in the Ethernet Cable Categories chart →

Sources

  1. ANSI/TIA-568.2-D: Balanced Twisted-Pair Telecommunications Cabling and Components Standard (Categories 3, 5e, 6, 6A, 8)
  2. ISO/IEC 11801-1:2017, Information technology, generic cabling for customer premises (classes D, E, EA, F, FA, I, II; shield naming Annex)
  3. IEEE 802.3: 10BASE-T, 100BASE-TX, 1000BASE-T, 2.5G/5GBASE-T (802.3bz), 10GBASE-T (802.3an), 25G/40GBASE-T (802.3bq)
  4. TIA TSB-155: Guidelines for the assessment of installed Category 6 cabling to support 10GBASE-T (up to 55 m)
  5. ANSI/TIA-568.0 / 568.1: T568A and T568B pin/pair assignments

Values last checked against these sources on November 15, 2026. · How we check data

Reference values for planning and identification. Confirm critical dimensions with the manufacturer's drawing or the current edition of the standard before production.