Cat7A Cable Specifications

Ethernet Cable Categories

Cat7A twisted-pair cable is specified up to 1000 MHz and carries up to 10 Gbit/s over a 100 m (328 ft) channel. ISO/IEC 11801: Class FA. Typical construction: 22–24 AWG, S/FTP.

Bandwidth
1000 MHz
Max. speed (full channel)
10 Gbit/s
Channel length
100 m328 ft328 ft100 m

Drawing

Cat7A · typical: S/FTPoverall braid + foil around each pair
Cross-section; colors show the four pairs.Schematic, not to scale

Cat7A specifications

Bandwidth1000 MHz
Max. speed (full channel)10 Gbit/s
Channel length100 m328 ft
10GBASE-T reach100 m328 ft
ISO/IEC 11801 classClass FA
TIA standardnot recognised by TIA
Typical conductor22–24 AWG
Typical shieldingS/FTP
ConnectorGG45, TERA, ARJ45
Typical use10GBASE-T, broadband CATV over one pair

Cat7A (Class FA) extends Cat7 to 1000 MHz. It was promoted for running TV broadband alongside data, but it has been overtaken by Cat6A for 10 Gbit/s and by Cat8 for 25/40 Gbit/s.

Neighbouring categories

All Ethernet Cable Categories sizes

Compare all 9 sizes in the Ethernet Cable Categories chart →

Sources

  1. ANSI/TIA-568.2-D: Balanced Twisted-Pair Telecommunications Cabling and Components Standard (Categories 3, 5e, 6, 6A, 8)
  2. ISO/IEC 11801-1:2017, Information technology, generic cabling for customer premises (classes D, E, EA, F, FA, I, II; shield naming Annex)
  3. IEEE 802.3: 10BASE-T, 100BASE-TX, 1000BASE-T, 2.5G/5GBASE-T (802.3bz), 10GBASE-T (802.3an), 25G/40GBASE-T (802.3bq)
  4. TIA TSB-155: Guidelines for the assessment of installed Category 6 cabling to support 10GBASE-T (up to 55 m)
  5. ANSI/TIA-568.0 / 568.1: T568A and T568B pin/pair assignments

Values last checked against these sources on November 15, 2026. · How we check data

Reference values for planning and identification. Confirm critical dimensions with the manufacturer's drawing or the current edition of the standard before production.