1.75 mm Filament: Temperatures, Density and Length per kg
3D Printer Filament · Diameters · length per kg of PLA
1.75 mm filament. Typical settings and properties are listed below, with the length of a 1 kg spool computed from the density. Always start from the temperatures printed on your spool.
- dDiameter
- 1.75 mm0.0689 in0.0689 in1.75 mm
- Length per kg
- 335 m1099 ft1099 ft335 m
Drawing
1.75 mm specifications
| dDiameter | 1.75 mm0.0689 in |
|---|---|
| Diameter tolerance | ±0.02 mm (premium) to ±0.05 mm (typical) |
| Cross-section | 2.41 mm²0.00374 in² |
| Length per kg | 335 m1099 ft |
| Length per kg, PETG | 327 m1073 ft |
| Length per kg, ABS | 400 m1312 ft |
| Weight per metre, PLA | 2.98 g/m |
1.75 mm is the standard diameter of almost all current consumer and prosumer printers. A 1 kg spool is about 335 m of PLA, 330 m of PETG or 400 m of ABS.
Also known as
1.75
All filaments
Sources
- Prusa Knowledge Base: Material guide (PLA, PETG, ASA, PC, Polyamide pages)
- Prusament technical data sheets (diameter tolerance ±0.02 mm, densities)
- Ultimaker: material technical data sheets (2.85 mm filaments)
- Simplify3D: Filament properties table
- Victrex: PEEK 450G datasheet (Tg 143 °C, density 1.30 g/cm³)
Values last checked against these sources on November 15, 2026. · How we check data
Reference values for planning and identification. Confirm critical dimensions with the manufacturer's drawing or the current edition of the standard before production.