2.85 mm Filament: Temperatures, Density and Length per kg

3D Printer Filament · Diameters · length per kg of PLA

2.85 mm filament. Typical settings and properties are listed below, with the length of a 1 kg spool computed from the density. Always start from the temperatures printed on your spool.

dDiameter
2.85 mm0.1122 in0.1122 in2.85 mm
Length per kg
126 m413 ft413 ft126 m

Drawing

1.75 mm2.85 mm⌀2.85 mm⌀0.1122 in3.00 mm
1.75, 2.85 and 3.00 mm filament side by side.Drawn to scale · Dimensions in mmDimensions in inches

2.85 mm specifications

dDiameter2.85 mm0.1122 in
Diameter tolerance±0.05 mm typical
Cross-section6.38 mm²0.00989 in²
Length per kg126 m413 ft
Length per kg, PETG123 m404 ft
Length per kg, ABS151 m495 ft
Weight per metre, PLA7.91 g/m

2.85 mm filament is what is usually sold as '3 mm'. It is used by Ultimaker and some older Lulzbot and RepRap printers. The thicker strand is stiffer, which can make flexible filaments easier to feed, but holds less length per kilogram: about 126 m of PLA per kg.

Also known as

2.85

All filaments

Compare all 16 diameters and materials →

Sources

  1. Prusa Knowledge Base: Material guide (PLA, PETG, ASA, PC, Polyamide pages)
  2. Prusament technical data sheets (diameter tolerance ±0.02 mm, densities)
  3. Ultimaker: material technical data sheets (2.85 mm filaments)
  4. Simplify3D: Filament properties table
  5. Victrex: PEEK 450G datasheet (Tg 143 °C, density 1.30 g/cm³)

Values last checked against these sources on November 15, 2026. · How we check data

Reference values for planning and identification. Confirm critical dimensions with the manufacturer's drawing or the current edition of the standard before production.