3.00 mm Filament: Temperatures, Density and Length per kg

3D Printer Filament · Diameters · length per kg of PLA

3.00 mm filament. Typical settings and properties are listed below, with the length of a 1 kg spool computed from the density. Always start from the temperatures printed on your spool.

dDiameter
3.00 mm0.1181 in0.1181 in3.00 mm
Length per kg
114 m374 ft374 ft114 m

Drawing

1.75 mm2.85 mm3.00 mm⌀3.00 mm⌀0.1181 in
1.75, 2.85 and 3.00 mm filament side by side.Drawn to scale · Dimensions in mmDimensions in inches

3.00 mm specifications

dDiameter3.00 mm0.1181 in
Diameter tolerance±0.05–0.10 mm typical
Cross-section7.07 mm²0.01096 in²
Length per kg114 m374 ft
Length per kg, PETG111 m364 ft
Length per kg, ABS136 m446 ft
Weight per metre, PLA8.77 g/m

True 3.00 mm filament is uncommon today; most '3 mm' filament is actually 2.85 mm. If your printer is set for 3 mm, measure the filament and enter the real diameter in the slicer, or extrusion will be about 10 % off.

All filaments

Compare all 16 diameters and materials →

Sources

  1. Prusa Knowledge Base: Material guide (PLA, PETG, ASA, PC, Polyamide pages)
  2. Prusament technical data sheets (diameter tolerance ±0.02 mm, densities)
  3. Ultimaker: material technical data sheets (2.85 mm filaments)
  4. Simplify3D: Filament properties table
  5. Victrex: PEEK 450G datasheet (Tg 143 °C, density 1.30 g/cm³)

Values last checked against these sources on November 15, 2026. · How we check data

Reference values for planning and identification. Confirm critical dimensions with the manufacturer's drawing or the current edition of the standard before production.