PC Filament: Temperatures, Density and Length per kg

3D Printer Filament · Materials · length per kg at 1.75 mm

PC filament. Typical settings and properties are listed below, with the length of a 1 kg spool computed from the density. Always start from the temperatures printed on your spool.

Nozzle temperature (typical)
260–310°C500–590°F500–590°F260–310°C
Bed temperature (typical)
100–120°C212–248°F212–248°F100–120°C
ρDensity (typical)
1.20 g/cm³0.0434 lb/in³0.0434 lb/in³1.20 g/cm³
Length per kg
346 m1135 ft1135 ft346 m

Drawing

050100150200250300350°Cbed100–120°C212–248°Fnozzle260–310°C500–590°FTg 147°C297°F
Typical bed and nozzle ranges with glass transition (Tg), °C.Proportions shown, not to scale

PC specifications

Nozzle temperature (typical)260–310°C500–590°F
Bed temperature (typical)100–120°C212–248°F
TgGlass transition (approx.)147°C297°F
ρDensity (typical)1.20 g/cm³0.0434 lb/in³
EnclosureRequired (warping, fumes)
Length per kg346 m1135 ft
Length per kg at 2.85 mm131 m430 ft

Polycarbonate needs an all-metal hotend for 260–310 °C, a hot bed and an enclosure. Parts are strong and keep their shape up to about 140 °C.

All filaments

Compare all 16 diameters and materials →

Sources

  1. Prusa Knowledge Base: Material guide (PLA, PETG, ASA, PC, Polyamide pages)
  2. Prusament technical data sheets (diameter tolerance ±0.02 mm, densities)
  3. Ultimaker: material technical data sheets (2.85 mm filaments)
  4. Simplify3D: Filament properties table
  5. Victrex: PEEK 450G datasheet (Tg 143 °C, density 1.30 g/cm³)

Values last checked against these sources on November 15, 2026. · How we check data

Reference values for planning and identification. Confirm critical dimensions with the manufacturer's drawing or the current edition of the standard before production.