Nylon PA12 Filament: Temperatures, Density and Length per kg
3D Printer Filament · Materials · length per kg at 1.75 mm
Nylon PA12 filament. Typical settings and properties are listed below, with the length of a 1 kg spool computed from the density. Always start from the temperatures printed on your spool.
- Nozzle temperature (typical)
- 245–275°C473–527°F473–527°F245–275°C
- Bed temperature (typical)
- 80–110°C176–230°F176–230°F80–110°C
- ρDensity (typical)
- 1.01 g/cm³0.0365 lb/in³0.0365 lb/in³1.01 g/cm³
- Length per kg
- 412 m1352 ft1352 ft412 m
Drawing
Nylon PA12 specifications
| Nozzle temperature (typical) | 245–275°C473–527°F |
|---|---|
| Bed temperature (typical) | 80–110°C176–230°F |
| ρDensity (typical) | 1.01 g/cm³0.0365 lb/in³ |
| Enclosure | Recommended |
| Length per kg | 412 m1352 ft |
| Length per kg at 2.85 mm | 155 m509 ft |
PA12 absorbs less water than PA6 and is lower in density (about 1.01 g/cm³), so a kilogram holds more length. It warps less and is the base of many carbon-fiber nylon filaments.
Also known as
PA12
All filaments
Sources
- Prusa Knowledge Base: Material guide (PLA, PETG, ASA, PC, Polyamide pages)
- Prusament technical data sheets (diameter tolerance ±0.02 mm, densities)
- Ultimaker: material technical data sheets (2.85 mm filaments)
- Simplify3D: Filament properties table
- Victrex: PEEK 450G datasheet (Tg 143 °C, density 1.30 g/cm³)
Values last checked against these sources on November 15, 2026. · How we check data
Reference values for planning and identification. Confirm critical dimensions with the manufacturer's drawing or the current edition of the standard before production.