PEEK Filament: Temperatures, Density and Length per kg

3D Printer Filament · Materials · length per kg at 1.75 mm

PEEK filament. Typical settings and properties are listed below, with the length of a 1 kg spool computed from the density. Always start from the temperatures printed on your spool.

Nozzle temperature (typical)
370–420°C698–788°F698–788°F370–420°C
Bed temperature (typical)
120–160°C248–320°F248–320°F120–160°C
ρDensity (typical)
1.30 g/cm³0.0470 lb/in³0.0470 lb/in³1.30 g/cm³
Length per kg
320 m1050 ft1050 ft320 m

Drawing

050100150200250300350400450°Cbed120–160°C248–320°Fnozzle370–420°C698–788°FTg 143°C289°F
Typical bed and nozzle ranges with glass transition (Tg), °C.Proportions shown, not to scale

PEEK specifications

Nozzle temperature (typical)370–420°C698–788°F
Bed temperature (typical)120–160°C248–320°F
TgGlass transition (approx.)143°C289°F
ρDensity (typical)1.30 g/cm³0.0470 lb/in³
EnclosureHeated chamber required
Length per kg320 m1050 ft
Length per kg at 2.85 mm121 m397 ft

PEEK is printed only on industrial machines with a hotend above 400 °C and a heated chamber; the chamber and annealing control its crystallinity and strength. Tg 143 °C, continuous service to about 250 °C.

All filaments

Compare all 16 diameters and materials →

Sources

  1. Prusa Knowledge Base: Material guide (PLA, PETG, ASA, PC, Polyamide pages)
  2. Prusament technical data sheets (diameter tolerance ±0.02 mm, densities)
  3. Ultimaker: material technical data sheets (2.85 mm filaments)
  4. Simplify3D: Filament properties table
  5. Victrex: PEEK 450G datasheet (Tg 143 °C, density 1.30 g/cm³)

Values last checked against these sources on November 15, 2026. · How we check data

Reference values for planning and identification. Confirm critical dimensions with the manufacturer's drawing or the current edition of the standard before production.