PETG-CF Filament: Temperatures, Density and Length per kg
3D Printer Filament · Materials · length per kg at 1.75 mm
PETG-CF filament. Typical settings and properties are listed below, with the length of a 1 kg spool computed from the density. Always start from the temperatures printed on your spool.
- Nozzle temperature (typical)
- 240–260°C464–500°F464–500°F240–260°C
- Bed temperature (typical)
- 70–90°C158–194°F158–194°F70–90°C
Drawing
PETG-CF specifications
| Nozzle temperature (typical) | 240–260°C464–500°F |
|---|---|
| Bed temperature (typical) | 70–90°C158–194°F |
| TgGlass transition (approx.) | 80°C176°F |
| Enclosure | Not needed |
| Abrasive | Yes, use a hardened steel or ruby nozzle |
Carbon-fiber PETG combines PETG's toughness with higher stiffness and a matte surface. Use a hardened nozzle of 0.4 mm or larger (0.6 mm reduces clogging). Density depends on the fiber content.
All filaments
Sources
- Prusa Knowledge Base: Material guide (PLA, PETG, ASA, PC, Polyamide pages)
- Prusament technical data sheets (diameter tolerance ±0.02 mm, densities)
- Ultimaker: material technical data sheets (2.85 mm filaments)
- Simplify3D: Filament properties table
- Victrex: PEEK 450G datasheet (Tg 143 °C, density 1.30 g/cm³)
Values last checked against these sources on November 15, 2026. · How we check data
Reference values for planning and identification. Confirm critical dimensions with the manufacturer's drawing or the current edition of the standard before production.