PLA Filament: Temperatures, Density and Length per kg
3D Printer Filament · Materials · length per kg at 1.75 mm
PLA filament. Typical settings and properties are listed below, with the length of a 1 kg spool computed from the density. Always start from the temperatures printed on your spool.
- Nozzle temperature (typical)
- 190–220°C374–428°F374–428°F190–220°C
- Bed temperature (typical)
- 50–60°C122–140°F122–140°F50–60°C
- ρDensity (typical)
- 1.24 g/cm³0.0448 lb/in³0.0448 lb/in³1.24 g/cm³
- Length per kg
- 335 m1099 ft1099 ft335 m
Drawing
PLA specifications
| Nozzle temperature (typical) | 190–220°C374–428°F |
|---|---|
| Bed temperature (typical) | 50–60°C122–140°F |
| TgGlass transition (approx.) | 60°C140°F |
| ρDensity (typical) | 1.24 g/cm³0.0448 lb/in³ |
| Enclosure | Not needed |
| Length per kg | 335 m1099 ft |
| Length per kg at 2.85 mm | 126 m413 ft |
PLA is the default material for prototypes, models and tools that stay below about 50–55 °C. It needs strong part cooling and no enclosure. A heated bed helps adhesion but is not strictly needed on textured sheets.
Also known as
PLA+
All filaments
Sources
- Prusa Knowledge Base: Material guide (PLA, PETG, ASA, PC, Polyamide pages)
- Prusament technical data sheets (diameter tolerance ±0.02 mm, densities)
- Ultimaker: material technical data sheets (2.85 mm filaments)
- Simplify3D: Filament properties table
- Victrex: PEEK 450G datasheet (Tg 143 °C, density 1.30 g/cm³)
Values last checked against these sources on November 15, 2026. · How we check data
Reference values for planning and identification. Confirm critical dimensions with the manufacturer's drawing or the current edition of the standard before production.