PETG Filament: Temperatures, Density and Length per kg

3D Printer Filament · Materials · length per kg at 1.75 mm

PETG filament. Typical settings and properties are listed below, with the length of a 1 kg spool computed from the density. Always start from the temperatures printed on your spool.

Nozzle temperature (typical)
230–250°C446–482°F446–482°F230–250°C
Bed temperature (typical)
70–90°C158–194°F158–194°F70–90°C
ρDensity (typical)
1.27 g/cm³0.0459 lb/in³0.0459 lb/in³1.27 g/cm³
Length per kg
327 m1073 ft1073 ft327 m

Drawing

050100150200250300°Cbed70–90°C158–194°Fnozzle230–250°C446–482°FTg 80°C176°F
Typical bed and nozzle ranges with glass transition (Tg), °C.Proportions shown, not to scale

PETG specifications

Nozzle temperature (typical)230–250°C446–482°F
Bed temperature (typical)70–90°C158–194°F
TgGlass transition (approx.)80°C176°F
ρDensity (typical)1.27 g/cm³0.0459 lb/in³
EnclosureNot needed
Length per kg327 m1073 ft
Length per kg at 2.85 mm123 m404 ft

PETG sticks very well to smooth PEI, so well that it can tear the coating; use a textured sheet or a release agent such as glue stick. Moderate cooling, slower than PLA for best layer bonding.

All filaments

Compare all 16 diameters and materials →

Sources

  1. Prusa Knowledge Base: Material guide (PLA, PETG, ASA, PC, Polyamide pages)
  2. Prusament technical data sheets (diameter tolerance ±0.02 mm, densities)
  3. Ultimaker: material technical data sheets (2.85 mm filaments)
  4. Simplify3D: Filament properties table
  5. Victrex: PEEK 450G datasheet (Tg 143 °C, density 1.30 g/cm³)

Values last checked against these sources on November 15, 2026. · How we check data

Reference values for planning and identification. Confirm critical dimensions with the manufacturer's drawing or the current edition of the standard before production.