PVA Filament: Temperatures, Density and Length per kg

3D Printer Filament · Materials · length per kg at 1.75 mm

PVA filament. Typical settings and properties are listed below, with the length of a 1 kg spool computed from the density. Always start from the temperatures printed on your spool.

Nozzle temperature (typical)
185–210°C365–410°F365–410°F185–210°C
Bed temperature (typical)
45–60°C113–140°F113–140°F45–60°C
ρDensity (typical)
1.23 g/cm³0.0444 lb/in³0.0444 lb/in³1.23 g/cm³
Length per kg
338 m1109 ft1109 ft338 m

Drawing

050100150200250°Cbed45–60°C113–140°Fnozzle185–210°C365–410°F
Typical bed and nozzle ranges with glass transition (Tg), °C.Proportions shown, not to scale

PVA specifications

Nozzle temperature (typical)185–210°C365–410°F
Bed temperature (typical)45–60°C113–140°F
ρDensity (typical)1.23 g/cm³0.0444 lb/in³
EnclosureNot needed
Length per kg338 m1109 ft
Length per kg at 2.85 mm127 m417 ft

PVA dissolves in water and is used as support for PLA and some PETG prints on dual-extrusion printers. It is very hygroscopic: keep it sealed and dry it before use.

All filaments

Compare all 16 diameters and materials →

Sources

  1. Prusa Knowledge Base: Material guide (PLA, PETG, ASA, PC, Polyamide pages)
  2. Prusament technical data sheets (diameter tolerance ±0.02 mm, densities)
  3. Ultimaker: material technical data sheets (2.85 mm filaments)
  4. Simplify3D: Filament properties table
  5. Victrex: PEEK 450G datasheet (Tg 143 °C, density 1.30 g/cm³)

Values last checked against these sources on November 15, 2026. · How we check data

Reference values for planning and identification. Confirm critical dimensions with the manufacturer's drawing or the current edition of the standard before production.