PLA-CF Filament: Temperatures, Density and Length per kg

3D Printer Filament · Materials · length per kg at 1.75 mm

PLA-CF filament. Typical settings and properties are listed below, with the length of a 1 kg spool computed from the density. Always start from the temperatures printed on your spool.

Nozzle temperature (typical)
200–230°C392–446°F392–446°F200–230°C
Bed temperature (typical)
50–60°C122–140°F122–140°F50–60°C

Drawing

050100150200250300°Cbed50–60°C122–140°Fnozzle200–230°C392–446°FTg 60°C140°F
Typical bed and nozzle ranges with glass transition (Tg), °C.Proportions shown, not to scale

PLA-CF specifications

Nozzle temperature (typical)200–230°C392–446°F
Bed temperature (typical)50–60°C122–140°F
TgGlass transition (approx.)60°C140°F
EnclosureNot needed
AbrasiveYes, use a hardened steel or ruby nozzle

Carbon-fiber PLA is PLA filled with chopped carbon fibers: stiffer, matte, less stringing. The fibers wear brass nozzles in a few hundred grams; use hardened steel. Density depends on the fiber content, so check the spool for length per kilogram.

All filaments

Compare all 16 diameters and materials →

Sources

  1. Prusa Knowledge Base: Material guide (PLA, PETG, ASA, PC, Polyamide pages)
  2. Prusament technical data sheets (diameter tolerance ±0.02 mm, densities)
  3. Ultimaker: material technical data sheets (2.85 mm filaments)
  4. Simplify3D: Filament properties table
  5. Victrex: PEEK 450G datasheet (Tg 143 °C, density 1.30 g/cm³)

Values last checked against these sources on November 15, 2026. · How we check data

Reference values for planning and identification. Confirm critical dimensions with the manufacturer's drawing or the current edition of the standard before production.