Film Format Chart: 135, 120, 110, APS, Sheet Film and Cine Frame Sizes
The numbers on film are format codes, not sizes: 135 is 35 mm film with a 36 × 24 mm frame; 120 is 61 mm-wide roll film whose frame depends on the camera: 6 × 4.5, 6 × 6, 6 × 7 or 6 × 9 cm (8 to 16 frames per roll); 220 is the same film twice as long. Sheet film is named by the sheet in inches: 4 × 5, 8 × 10.
Size chartTap a size for its drawing and full specs
| Format | WFrame widthmminmm · in | HFrame heightmminmm · in | Crop factor vs 135× | Film / loading | Frames per roll / speed |
|---|---|---|---|---|---|
| 135 and medium-format roll film (120/220, 127) | |||||
| 135 (35 mm) | 361.417 | 240.945 | 1.00 | 35 mm, perforated, cassette | 12, 24, 27 or 36 |
| Half frame (135) | 180.709 | 240.945 | 1.44 | 35 mm, perforated, cassette | 48 or 72 (double the 135 count) |
| 6 × 4.5 (645) | 562.205 | 41.51.634 | 0.62 | 120 / 220 roll film | 120: 15 or 16 · 220: 30–32 |
| 6 × 6 | 562.205 | 562.205 | 0.55 | 120 / 220 roll film | 120: 12 or 13 · 220: 24–27 |
| 6 × 7 | 702.756 | 562.205 | 0.48 | 120 / 220 roll film | 120: 10 · 220: 20 |
| 6 × 8 | 773.031 | 562.205 | 0.45 | 120 / 220 roll film | 120: 9 · 220: 19 |
| 6 × 9 | 843.307 | 562.205 | 0.43 | 120 / 220 roll film | 120: 8 · 220: 16 |
| 6 × 12 | 1184.646 | 562.205 | 0.33 | 120 / 220 roll film | 120: 6 · 220: 12 |
| 6 × 17 | 1686.614 | 562.205 | 0.24 | 120 / 220 roll film | 120: 4 · 220: 9 |
| 127 (4 × 4 cm) | 401.575 | 401.575 | 0.76 | 127 roll film (46 mm) | 12 |
| Cartridge and cassette formats (126, 110, APS) | |||||
| 126 (Instamatic) | 281.102 | 281.102 | 1.09 | 35 mm wide, cartridge | 12, 20 or 24 |
| 110 | 170.669 | 130.512 | 2.02 | 16 mm wide, cartridge | 12 or 24 |
| APS H (high definition) | 30.21.189 | 16.70.657 | 1.25 | 24 mm (IX240), cassette | 15, 25 or 40 |
| APS C (classic) | 25.10.988 | 16.70.657 | 1.44 | 24 mm (IX240), cassette | 15, 25 or 40 (crop of H) |
| APS P (panoramic) | 30.21.189 | 9.50.374 | 1.37 | 24 mm (IX240), cassette | 15, 25 or 40 (crop of H) |
| Large-format sheet film | |||||
| 4 × 5 in sheet | 101.64 | 1275 | 0.27 | Sheet film in holders | 1 per sheet (2 per holder) |
| 5 × 7 in sheet | 1275 | 177.87 | 0.20 | Sheet film in holders | 1 per sheet |
| 8 × 10 in sheet | 203.28 | 25410 | 0.13 | Sheet film in holders | 1 per sheet |
| Motion-picture film (camera aperture) | |||||
| Standard 8 mm | 4.80.189 | 3.50.138 | 7.28 | 16 mm run twice, split to 8 mm; 1 perf/frame | 16 fps (silent), 18 fps |
| Super 8 | 5.460.215 | 4.010.158 | 6.39 | 8 mm, cartridge; 1 perf/frame | 18 or 24 fps |
| 16 mm | 10.260.404 | 7.490.295 | 3.41 | 16 mm, perforated | 24 fps (sound) |
| Super 16 | 12.520.493 | 7.410.292 | 2.97 | 16 mm, single perforated | 24 fps |
| 35 mm Academy | 21.950.864 | 160.63 | 1.59 | 35 mm, 4 perf/frame | 24 fps |
| Super 35 (4-perf) | 24.890.98 | 18.660.735 | 1.39 | 35 mm, 4 perf/frame | 24 fps |
| IMAX 15/70 | 70.412.772 | 52.632.072 | 0.49 | 70 mm (65 mm negative), 15 perf/frame, run horizontally | 24 fps |
No exact match. The nearest sizes:
How film formats are named
Kodak numbers (135, 120, 127, 126, 110) identify the film and its spool or cartridge, not the picture size. 135 is 35 mm perforated film in a cassette; the standard frame is 36 × 24 mm and a half-frame camera makes 18 × 24 mm frames on the same film.
120 frame names are rounded centimetres. '6 × 6' is really 56 × 56 mm, '6 × 7' about 56 × 70 mm, '6 × 4.5' about 56 × 41.5 mm. The film is the same; the camera sets the frame and therefore the number of shots: 16 (or 15) for 6 × 4.5, 12 (or 13) for 6 × 6, 10 for 6 × 7, 8 for 6 × 9. 220 has no paper backing along most of its length and gives twice as many frames; it is no longer made.
Sheet film is named by the nominal sheet size in inches (4 × 5, 5 × 7, 8 × 10). The exposed image is a few millimetres smaller because the holder's rebate masks the edges.
Cine sizes are camera apertures: the part of each frame exposed in the gate. Projection and scanning use slightly smaller areas, which is why published Super 8 and Academy figures differ by a few tenths of a millimetre.
About Film Formats
Crop factor is given against the 135 frame, the same reference digital cameras use. A value below 1 means a larger frame: 6 × 7 is 0.49×, so an 80 mm lens on 6 × 7 frames roughly like a 40 mm lens on 35 mm (by the diagonal; the aspect ratios differ). A 4 × 5 in sheet is about 0.27×: the 150 mm 'normal' lens of large format frames like a 40 mm on 35 mm.
When scanning or printing, the aspect ratio decides cropping: 135 and 6 × 9 are 3:2 and fill a 4 × 6 print; 6 × 7 and 4 × 5 are close to 5:4 and fit 8 × 10 prints; 6 × 6 needs a square print or a crop.
Super 35 and Academy share the same 35 mm motion-picture film; Super 35 uses the area set aside for the optical soundtrack, which is why digital cinema cameras with 'Super 35 sensors' have about 25 × 19 mm or smaller sensors.
Questions
What size is a 35 mm film frame?
36 × 24 mm (1.42 × 0.94 in) on 135 film, which is 35 mm wide including the perforations. Half-frame cameras make 18 × 24 mm frames.
How many pictures are on a roll of 120 film?
It depends on the camera: 15 or 16 at 6 × 4.5, 12 (13 on some cameras) at 6 × 6, 10 at 6 × 7, 9 at 6 × 8, 8 at 6 × 9, 6 at 6 × 12 and 4 at 6 × 17. 220 film gives about twice as many.
What is the difference between 120 and 220 film?
Same width and frame sizes; 220 is twice as long with paper only at the ends, so it gives twice the frames. 220 production has stopped.
How big is a 6 × 6 negative?
56 × 56 mm. The '6' is a rounded centimetre name; the film is about 61 mm wide.
What is the frame size of Super 8?
About 5.5 × 4 mm (5.46 × 4.01 mm in the standard table; the camera aperture is quoted as 5.79 × 4.01 mm). Standard 8 is 4.8 × 3.5 mm.
Sources
- Wikipedia: List of photographic film formats
- Wikipedia: Advanced Photo System (H, C, P frame sizes)
- National Film and Sound Archive of Australia: Film formats (camera apertures)
- proav.de: Film formats (cine apertures)
- BKSTS Illustrated Dictionary: Appendix A: image areas for motion picture films
- Wikipedia: Super 8 film; 8 mm film
Values last checked against these sources on November 15, 2026. · How we check data
Reference values for planning and identification. Confirm critical dimensions with the manufacturer's drawing or the current edition of the standard before production.