Lens Filter Thread Sizes: Diameters, Pitches and Step Rings
A lens's filter size is the diameter of the thread at the front, marked on the lens with ⌀ (for example ⌀58 or 58 mm). Every filter from 43 to 82 mm uses a 0.75 mm pitch, so any brand fits. Smaller sizes come in 0.5 or 0.75 mm (40.5 mm is normally 0.5 mm), and 86–105 mm in 1.0 or 0.75 mm, so check the pitch before buying outside 43–82 mm.
Size chartSort by any column, or filter to find a row
| Filter size | ⌀Thread diametermmin | Thread pitchmm | Thread designation | Other pitch in use |
|---|---|---|---|---|
| Small (0.5 mm pitch) | ||||
| 25 mm | 250.984 | 0.50 | M25 × 0.5 | 0.75 mm |
| 27 mm | 271.063 | 0.50 | M27 × 0.5 | 0.75 mm |
| 28 mm | 281.102 | 0.50 | M28 × 0.5 | 0.75 mm |
| 30 mm | 301.181 | 0.75 | M30 × 0.75 | 0.5 mm |
| 30.5 mm | 30.51.201 | 0.75 | M30.5 × 0.75 | 0.5 mm |
| 34 mm | 341.339 | 0.75 | M34 × 0.75 | 0.5 mm |
| 37 mm | 371.457 | 0.75 | M37 × 0.75 | 0.5 mm |
| 39 mm | 391.535 | 0.75 | M39 × 0.75 | 0.5 mm |
| 40.5 mm | 40.51.594 | 0.50 | M40.5 × 0.5 | 0.75 mm |
| Standard (0.75 mm pitch) | ||||
| 43 mm | 431.693 | 0.75 | M43 × 0.75 | — |
| 46 mm | 461.811 | 0.75 | M46 × 0.75 | — |
| 49 mm | 491.929 | 0.75 | M49 × 0.75 | — |
| 52 mm | 522.047 | 0.75 | M52 × 0.75 | — |
| 55 mm | 552.165 | 0.75 | M55 × 0.75 | — |
| 58 mm | 582.283 | 0.75 | M58 × 0.75 | — |
| 62 mm | 622.441 | 0.75 | M62 × 0.75 | — |
| 67 mm | 672.638 | 0.75 | M67 × 0.75 | — |
| 72 mm | 722.835 | 0.75 | M72 × 0.75 | — |
| 77 mm | 773.031 | 0.75 | M77 × 0.75 | — |
| 82 mm | 823.228 | 0.75 | M82 × 0.75 | — |
| Large (1.0 mm pitch) | ||||
| 86 mm | 863.386 | 1.00 | M86 × 1 | 0.75 mm |
| 95 mm | 953.740 | 1.00 | M95 × 1 | 0.75 mm |
| 105 mm | 1054.134 | 1.00 | M105 × 1 | 0.75 mm |
No exact match. The nearest sizes:
Finding your filter size
Look on the front of the lens barrel or the inside of the lens cap: the number after ⌀ is the filter thread in millimetres (⌀67 = 67 mm). The same number is printed on the back of the lens cap of most makers and in the lens specifications as 'filter size' or 'filter diameter'.
The pitch is the distance between thread crests. It is rarely printed on lenses because each diameter has a standard pitch; it matters below 43 mm and above 82 mm, where two pitches are made for the same diameter. A filter of the right diameter but wrong pitch starts but binds after half a turn. Stop there or it will cross-thread.
Thread designation M58 × 0.75 reads 'metric thread, 58 mm, 0.75 mm pitch', the same notation as machine threads but much finer and shallower. Filters have a male thread at the back and a female thread at the front so they can be stacked.
About Filter Thread Sizes
Filter sizes cluster around the popular lenses: 49–58 mm for primes and kit lenses on APS-C and full-frame bodies, 62–67 mm for compact zooms, 72–82 mm for fast standard and tele zooms (most f/2.8 standard zooms take 77 or 82 mm), and 95–105 mm for large telephotos and some ultra-wide zooms. Lenses with a bulbous front element (14 mm f/2.8 and similar) take no screw-in filter at all and need a holder system or a rear gel filter.
If you own lenses with several filter sizes, buy filters for the largest and use step-up rings on the others: a 58–77 mm ring lets a 77 mm polarizer sit on a 58 mm lens. Going up never adds vignetting. Step-down rings (a 77 mm lens with a 67 mm filter) cut into the image at wide angles and are usually only acceptable on telephotos.
Thin ('slim') filters reduce vignetting on wide lenses but often lack a front thread, so the lens cap or a second filter cannot be attached.
Questions
How do I know what filter size my lens takes?
Look for the ⌀ symbol and a number on the front of the lens or inside the lens cap: ⌀58 means 58 mm. It is also in the lens specifications as 'filter size'.
Are all 77 mm filters the same thread?
Yes. Filters from 43 to 82 mm use a 0.75 mm pitch, so any brand's 77 mm filter fits any 77 mm lens thread.
What thread pitch do 40.5 mm filters use?
Normally 0.5 mm (M40.5 × 0.5), but 0.75 mm versions exist. Sizes from 30 to 39 mm are made in both 0.5 and 0.75 mm, most often 0.75 mm.
Do step-up rings cause vignetting?
No. A step-up ring puts a larger filter in front of the lens, which only reduces vignetting. Step-down rings (smaller filter on a larger lens) usually do vignette at wide angles.
What pitch are 95 mm and 105 mm filters?
Both 1.0 mm and 0.75 mm are made for 86, 95 and 105 mm. Check the pitch in the lens specification (or the old filter) before buying sizes above 82 mm.
Sources
- Wikipedia: Photographic filter: common objective filter threads (diameter and pitch table)
- Marumi: FAQ: filter thread pitch
- Unique Photo: What thread size and pitch do camera lens filters use?
- Photrio forum: Different thread pitch on 95 mm filters
- gewinde-normen.de: Camera and lens mount threads
- Edmund Optics: Filter adapters and threaded mounts (M40.5 × 0.5, M62 × 0.75)
Values last checked against these sources on November 15, 2026. · How we check data
Reference values for planning and identification. Confirm critical dimensions with the manufacturer's drawing or the current edition of the standard before production.