Fuse Size Chart: Blade Fuses, Color Code and Cartridge Fuses

Automotive blade fuses come in six body sizes but share one color code: 5 A tan, 10 A red, 15 A blue, 20 A yellow, 30 A green. Maxi fuses use their own colors. Cartridge fuses are named by diameter × length: a 5 × 20 mm fuse is 5 mm across and 20 mm long.

31 sizesChecked 2026-11-156 sources

Size chartTap a size for its drawing and full specs

31 of 31
FuseLLengthmminWThicknessmminHHeightmmin⌀DiametermminRatings availableAColorColor name
Automotive blade fuse types
MICRO2 (APT/ATR)9.10.35833.80.15015.30.602—5–30——
MICRO3 (ATL)14.40.56694.20.16518.10.713—5–15——
LP-MINI (APS/ATT)10.90.42913.80.1508.70.343—2–30——
MINI (ATM/APM)10.90.42913.60.14216.30.642—2–30——
Regular (ATO/ATC)19.10.75205.10.20118.50.728—1–40——
MAXI (APX)29.21.14968.50.33534.31.350—20–80——
Blade fuse color code (Micro2, Micro3, LP-Mini, Mini, ATO/ATC)
1 A blade—————#1B1B1Bblack
2 A blade—————#8A8D91grey
3 A blade—————#7B4FB3violet
4 A blade—————#F19BBFpink
5 A blade—————#C8A477tan
7.5 A blade—————#7A4A24brown
10 A blade—————#D8261Fred
15 A blade—————#1F5FBFblue
20 A blade—————#F4CF1Ayellow
25 A blade—————#F3F1EAnatural / clear
30 A blade—————#2E9A43green
35 A blade—————#2AA7A1blue-green
40 A blade—————#F08A1Corange
Maxi fuse color code
20 A MAXI—————#F4CF1Ayellow
30 A MAXI—————#2E9A43green
40 A MAXI—————#F08A1Corange
50 A MAXI—————#D8261Fred
60 A MAXI—————#1F5FBFblue
80 A MAXI—————#F3F1EAnatural / clear
Cylindrical cartridge fuses
5 × 20 mm200.7874——50.19690.032–16——
2AG (4.5 × 14.5 mm)14.50.5709——4.50.1772———
3AG / 1/4 × 1-1/4 in (6.3 × 32 mm)31.751.2500——6.350.25000.0625–30——
10 × 38 mm (midget)38.11.5000——10.30.40550.1–32——
14 × 51 mm512.0079——14.30.5630———
22 × 58 mm582.2835——22.20.8740———

How to identify a fuse

Blade fuses: the amp rating is molded into the top, and the housing color repeats it. Measure the body length (the widest dimension) to find the type: about 9 mm is Micro2, 11 mm Mini or Low-profile Mini (the low-profile one barely stands out of the fuse box), 14.4 mm Micro3 (three blades), 19 mm the regular ATO/ATC, 29 mm Maxi. The rating range is the same color in every size: a red fuse is always 10 A.

ATO and ATC are the same size; ATO has an open bottom and ATC a closed (sealed) body. Either fits the same socket. APM/ATM and APS/ATT are the Mini and Low-profile Mini equivalents. Never replace a fuse with a higher rating. The fuse protects the wiring, and the wire in the circuit was sized for the original rating.

Cartridge fuses: diameter × length gives the format (5 × 20 mm, 6.3 × 32 mm = 1/4 × 1-1/4 in). The end cap is stamped with the rating, voltage and speed: F = fast-acting, T = time-delay (slow-blow), M medium; H = high breaking capacity (ceramic, sand-filled), L = low breaking capacity (glass). T2AL250V is a 2 A time-delay glass fuse for 250 V. For mains equipment, replace like with like: same size, rating, speed and breaking capacity.

About Fuse Sizes

Blade fuses are standardised in ISO 8820-3 and SAE J1284, and the dimensions in the chart are those of the Littelfuse reference designs that most makers follow. Length is the body across the widest side, thickness the body depth and height the overall height including the blades. Micro2 and Micro3 are found in many cars built since about 2010; the regular ATO size is still common in older cars, trucks, boats and aftermarket fuse blocks.

The color code applies to all blade sizes from Micro2 to ATO. A few ratings are rare in some sizes (Micro3, for example, is only made up to 15 A). Maxi fuses use different colors for the higher ratings (a 50 A Maxi is red, a 60 A Maxi blue), so check the number on top, not just the color.

Cartridge fuses protect electronics, appliances and meters. The 5 × 20 mm size (IEC 60127-2) is the international standard for equipment; North American equipment often uses 1/4 × 1-1/4 in (3AG, 6.3 × 32 mm). The 10 × 38 mm size covers the North American midget fuse (13/32 × 1-1/2 in) and the IEC 10 × 38 cylindrical fuse used in DIN-rail holders and solar PV string protection. 14 × 51 mm (up to about 50 A) and 22 × 58 mm (up to about 125 A) are IEC 60269-2 industrial sizes.

Checking a blade fuse

Look through the colored housing: an intact fuse shows a continuous metal link between the blades. The two small test windows on top let you check it in place with a multimeter or test light; both should read battery voltage when the circuit is powered.

Questions

What color is a 10 amp fuse?

Red, for Micro2, Micro3, Low-profile Mini, Mini and regular ATO/ATC blade fuses. 15 A is blue, 20 A yellow, 5 A tan, 7.5 A brown, 25 A clear and 30 A green.

What size is an ATO / ATC fuse?

About 19.1 mm long, 5.1 mm thick and 18.5 mm tall (0.75 × 0.20 × 0.73 in). ATO and ATC are interchangeable; ATC has a sealed bottom.

What is the difference between Mini and Low-profile Mini fuses?

Both are 10.9 mm long with the same blade spacing, but the Low-profile Mini is only about 8.7 mm tall versus 16.3 mm. A Low-profile Mini fits a Mini socket; a regular Mini can be too tall for a low-profile fuse box cover.

Can I use a Micro2 fuse instead of a Mini?

No. Micro2 is 9.1 mm long with closer blade spacing and does not fit a Mini socket. Fuse adapters exist for add-a-circuit taps, but the fuse itself must match the socket.

What does T2AL250V mean on a glass fuse?

T = time-delay (slow-blow), 2A = 2 amp rating, L = low breaking capacity (glass body), 250V = maximum voltage. Replace it with the same size, rating, speed and breaking capacity.

Sources

  1. ISO 8820-3: Road vehicles, fuse-links, Part 3: Fuse-links with tabs (blade type)
  2. SAE J1284: Blade type electric fuses
  3. Littelfuse: Automotive passenger car fuse catalogue (MICRO2, MICRO3, LP-MINI, MINI, ATO, MAXI)
  4. IEC 60127-2: Miniature fuses, Part 2: Cartridge fuse-links
  5. IEC 60269-2: Low-voltage fuses, Part 2: Fuses for use by authorized persons (cylindrical fuse system)
  6. Eaton Bussmann: Fuse dimension and catalogue data (AGC, MDL, KTK, FNM)

Values last checked against these sources on November 15, 2026. · How we check data

Reference values for planning and identification. Confirm critical dimensions with the manufacturer's drawing or the current edition of the standard before production.