Module 0.3 Gear Dimensions

Gear Modules · Fine modules below 1 (DIN 780 / JIS B 1701)

A Module 0.3 gear has a circular pitch of 0.943 mm (0.0371 in) and a whole tooth depth of 0.675 mm (0.0266 in), addendum 0.3 mm (0.0118 in), dedendum 0.375 mm (0.0148 in) on the ISO 53 basic rack with a 20° pressure angle. Pitch diameter = number of teeth × 0.3 mm. The equivalent diametral pitch is 84.67. The nearest inch gear, 80 DP, does not mesh with it.

mModule
0.3 mm0.0118 in0.0118 in0.3 mm
pCircular pitch (πm)
0.943 mm0.0371 in0.0371 in0.943 mm
hWhole depth (2.25 m)
0.675 mm0.0266 in0.0266 in0.675 mm
DPEquivalent diametral pitch (25.4/m)
84.67

Drawing

Pitch linep 0.943 mmp 0.0371 ins 0.471 mms 0.0186 inh 0.675 mmh 0.0266 inha 0.3 mmha 0.0118 inhf 0.375 mmhf 0.0148 in20°
Tip circlePitch circleBase circleRoot circle20-tooth gear, involute flanks
Proportions shown, not to scale · Dimensions in mmDimensions in inches

Module 0.3 specifications

mModule0.3 mm0.0118 in
Seriesfine
pCircular pitch (πm)0.943 mm0.0371 in
sTooth thickness (πm/2)0.471 mm0.0186 in
haAddendum (1 m)0.3 mm0.0118 in
hfDedendum (1.25 m)0.375 mm0.0148 in
hWhole depth (2.25 m)0.675 mm0.0266 in
cBottom clearance (0.25 m)0.075 mm0.0030 in
DPEquivalent diametral pitch (25.4/m)84.67
Nearest standard DP80

Also known as

M0.3MOD0.3

All gear modules

Compare all 37 modules in the Gear Modules chart →

Sources

  1. ISO 54:1996, Cylindrical gears for general engineering and for heavy engineering: Modules
  2. ISO 53:1998, Cylindrical gears for general and heavy engineering: Standard basic rack tooth profile
  3. DIN 780-1: Series of modules for gears (modules below 1 mm)
  4. KHK Gear Technical Reference: Module sizes and tooth profile

Values last checked against these sources on November 15, 2026. · How we check data

Reference values for planning and identification. Confirm critical dimensions with the manufacturer's drawing or the current edition of the standard before production.