Module 0.4 Gear Dimensions

Gear Modules · Fine modules below 1 (DIN 780 / JIS B 1701)

A Module 0.4 gear has a circular pitch of 1.257 mm (0.0495 in) and a whole tooth depth of 0.9 mm (0.0354 in), addendum 0.4 mm (0.0157 in), dedendum 0.5 mm (0.0197 in) on the ISO 53 basic rack with a 20° pressure angle. Pitch diameter = number of teeth × 0.4 mm. The equivalent diametral pitch is 63.5. The nearest inch gear, 64 DP, does not mesh with it.

mModule
0.4 mm0.0157 in0.0157 in0.4 mm
pCircular pitch (πm)
1.257 mm0.0495 in0.0495 in1.257 mm
hWhole depth (2.25 m)
0.9 mm0.0354 in0.0354 in0.9 mm
DPEquivalent diametral pitch (25.4/m)
63.5

Drawing

Pitch linep 1.257 mmp 0.0495 ins 0.628 mms 0.0247 inh 0.9 mmh 0.0354 inha 0.4 mmha 0.0157 inhf 0.5 mmhf 0.0197 in20°
Tip circlePitch circleBase circleRoot circle20-tooth gear, involute flanks
Proportions shown, not to scale · Dimensions in mmDimensions in inches

Module 0.4 specifications

mModule0.4 mm0.0157 in
Seriesfine
pCircular pitch (πm)1.257 mm0.0495 in
sTooth thickness (πm/2)0.628 mm0.0247 in
haAddendum (1 m)0.4 mm0.0157 in
hfDedendum (1.25 m)0.5 mm0.0197 in
hWhole depth (2.25 m)0.9 mm0.0354 in
cBottom clearance (0.25 m)0.1 mm0.0039 in
DPEquivalent diametral pitch (25.4/m)63.5
Nearest standard DP64

Also known as

M0.4MOD0.4

All gear modules

Compare all 37 modules in the Gear Modules chart →

Sources

  1. ISO 54:1996, Cylindrical gears for general engineering and for heavy engineering: Modules
  2. ISO 53:1998, Cylindrical gears for general and heavy engineering: Standard basic rack tooth profile
  3. DIN 780-1: Series of modules for gears (modules below 1 mm)
  4. KHK Gear Technical Reference: Module sizes and tooth profile

Values last checked against these sources on November 15, 2026. · How we check data

Reference values for planning and identification. Confirm critical dimensions with the manufacturer's drawing or the current edition of the standard before production.