Module 0.9 Gear Dimensions
Gear Modules · Fine modules below 1 (DIN 780 / JIS B 1701)
A Module 0.9 gear has a circular pitch of 2.827 mm (0.1113 in) and a whole tooth depth of 2.025 mm (0.0797 in), addendum 0.9 mm (0.0354 in), dedendum 1.125 mm (0.0443 in) on the ISO 53 basic rack with a 20° pressure angle. Pitch diameter = number of teeth × 0.9 mm. The equivalent diametral pitch is 28.22. The nearest inch gear, 32 DP, does not mesh with it.
- mModule
- 0.9 mm0.0354 in0.0354 in0.9 mm
- pCircular pitch (πm)
- 2.827 mm0.1113 in0.1113 in2.827 mm
- hWhole depth (2.25 m)
- 2.025 mm0.0797 in0.0797 in2.025 mm
- DPEquivalent diametral pitch (25.4/m)
- 28.22
Drawing
Module 0.9 specifications
| mModule | 0.9 mm0.0354 in |
|---|---|
| Series | fine |
| pCircular pitch (πm) | 2.827 mm0.1113 in |
| sTooth thickness (πm/2) | 1.414 mm0.0557 in |
| haAddendum (1 m) | 0.9 mm0.0354 in |
| hfDedendum (1.25 m) | 1.125 mm0.0443 in |
| hWhole depth (2.25 m) | 2.025 mm0.0797 in |
| cBottom clearance (0.25 m) | 0.225 mm0.0089 in |
| DPEquivalent diametral pitch (25.4/m) | 28.22 |
| Nearest standard DP | 32 |
Also known as
M0.9MOD0.9
All gear modules
Sources
- ISO 54:1996, Cylindrical gears for general engineering and for heavy engineering: Modules
- ISO 53:1998, Cylindrical gears for general and heavy engineering: Standard basic rack tooth profile
- DIN 780-1: Series of modules for gears (modules below 1 mm)
- KHK Gear Technical Reference: Module sizes and tooth profile
Values last checked against these sources on November 15, 2026. · How we check data
Reference values for planning and identification. Confirm critical dimensions with the manufacturer's drawing or the current edition of the standard before production.