Module 0.8 Gear Dimensions

Gear Modules · Fine modules below 1 (DIN 780 / JIS B 1701)

A Module 0.8 gear has a circular pitch of 2.513 mm (0.0989 in) and a whole tooth depth of 1.8 mm (0.0709 in), addendum 0.8 mm (0.0315 in), dedendum 1 mm (0.0394 in) on the ISO 53 basic rack with a 20° pressure angle. Pitch diameter = number of teeth × 0.8 mm. The equivalent diametral pitch is 31.75. The nearest inch gear, 32 DP, does not mesh with it.

mModule
0.8 mm0.0315 in0.0315 in0.8 mm
pCircular pitch (πm)
2.513 mm0.0989 in0.0989 in2.513 mm
hWhole depth (2.25 m)
1.8 mm0.0709 in0.0709 in1.8 mm
DPEquivalent diametral pitch (25.4/m)
31.75

Drawing

Pitch linep 2.513 mmp 0.0989 ins 1.257 mms 0.0495 inh 1.8 mmh 0.0709 inha 0.8 mmha 0.0315 inhf 1 mmhf 0.0394 in20°
Tip circlePitch circleBase circleRoot circle20-tooth gear, involute flanks
Proportions shown, not to scale · Dimensions in mmDimensions in inches

Module 0.8 specifications

mModule0.8 mm0.0315 in
Seriesfine
pCircular pitch (πm)2.513 mm0.0989 in
sTooth thickness (πm/2)1.257 mm0.0495 in
haAddendum (1 m)0.8 mm0.0315 in
hfDedendum (1.25 m)1 mm0.0394 in
hWhole depth (2.25 m)1.8 mm0.0709 in
cBottom clearance (0.25 m)0.2 mm0.0079 in
DPEquivalent diametral pitch (25.4/m)31.75
Nearest standard DP32

Module 0.8 is close to 32 DP (31.75 DP) and is a common size for model gears and small gearboxes; the two are not interchangeable.

Also known as

M0.8MOD0.8

All gear modules

Compare all 37 modules in the Gear Modules chart →

Sources

  1. ISO 54:1996, Cylindrical gears for general engineering and for heavy engineering: Modules
  2. ISO 53:1998, Cylindrical gears for general and heavy engineering: Standard basic rack tooth profile
  3. DIN 780-1: Series of modules for gears (modules below 1 mm)
  4. KHK Gear Technical Reference: Module sizes and tooth profile

Values last checked against these sources on November 15, 2026. · How we check data

Reference values for planning and identification. Confirm critical dimensions with the manufacturer's drawing or the current edition of the standard before production.