Module 1 Gear Dimensions

Gear Modules · ISO 54 modules, series I and II

A Module 1 gear has a circular pitch of 3.142 mm (0.1237 in) and a whole tooth depth of 2.25 mm (0.0886 in), addendum 1 mm (0.0394 in), dedendum 1.25 mm (0.0492 in) on the ISO 53 basic rack with a 20° pressure angle. Pitch diameter = number of teeth × 1 mm. The equivalent diametral pitch is 25.4. The nearest inch gear, 24 DP, does not mesh with it.

mModule
1 mm0.0394 in0.0394 in1 mm
pCircular pitch (πm)
3.142 mm0.1237 in0.1237 in3.142 mm
hWhole depth (2.25 m)
2.25 mm0.0886 in0.0886 in2.25 mm
DPEquivalent diametral pitch (25.4/m)
25.4

Drawing

Pitch linep 3.142 mmp 0.1237 ins 1.571 mms 0.0618 inh 2.25 mmh 0.0886 inha 1 mmha 0.0394 inhf 1.25 mmhf 0.0492 in20°
Tip circlePitch circleBase circleRoot circle20-tooth gear, involute flanks
Proportions shown, not to scale · Dimensions in mmDimensions in inches

Module 1 specifications

mModule1 mm0.0394 in
SeriesI
pCircular pitch (πm)3.142 mm0.1237 in
sTooth thickness (πm/2)1.571 mm0.0618 in
haAddendum (1 m)1 mm0.0394 in
hfDedendum (1.25 m)1.25 mm0.0492 in
hWhole depth (2.25 m)2.25 mm0.0886 in
cBottom clearance (0.25 m)0.25 mm0.0098 in
DPEquivalent diametral pitch (25.4/m)25.4
Nearest standard DP24

Module 1: pitch diameter in mm equals the number of teeth, and the circular pitch is π mm (3.1416 mm). Equivalent DP 25.4: close to 24 DP and 25 DP gears, but neither meshes with it.

Also known as

M1MOD1

All gear modules

Compare all 37 modules in the Gear Modules chart →

Sources

  1. ISO 54:1996, Cylindrical gears for general engineering and for heavy engineering: Modules
  2. ISO 53:1998, Cylindrical gears for general and heavy engineering: Standard basic rack tooth profile
  3. DIN 780-1: Series of modules for gears (modules below 1 mm)
  4. KHK Gear Technical Reference: Module sizes and tooth profile

Values last checked against these sources on November 15, 2026. · How we check data

Reference values for planning and identification. Confirm critical dimensions with the manufacturer's drawing or the current edition of the standard before production.