Module 25 Gear Dimensions

Gear Modules · ISO 54 modules, series I and II

A Module 25 gear has a circular pitch of 78.540 mm (3.0921 in) and a whole tooth depth of 56.25 mm (2.2146 in), addendum 25 mm (0.9843 in), dedendum 31.25 mm (1.2303 in) on the ISO 53 basic rack with a 20° pressure angle. Pitch diameter = number of teeth × 25 mm. The equivalent diametral pitch is 1.02. The nearest inch gear, 1 DP, does not mesh with it.

mModule
25 mm0.9843 in0.9843 in25 mm
pCircular pitch (πm)
78.540 mm3.0921 in3.0921 in78.540 mm
hWhole depth (2.25 m)
56.25 mm2.2146 in2.2146 in56.25 mm
DPEquivalent diametral pitch (25.4/m)
1.02

Drawing

Pitch linep 78.540 mmp 3.0921 ins 39.270 mms 1.5461 inh 56.25 mmh 2.2146 inha 25 mmha 0.9843 inhf 31.25 mmhf 1.2303 in20°
Tip circlePitch circleBase circleRoot circle20-tooth gear, involute flanks
Proportions shown, not to scale · Dimensions in mmDimensions in inches

Module 25 specifications

mModule25 mm0.9843 in
SeriesI
pCircular pitch (πm)78.540 mm3.0921 in
sTooth thickness (πm/2)39.270 mm1.5461 in
haAddendum (1 m)25 mm0.9843 in
hfDedendum (1.25 m)31.25 mm1.2303 in
hWhole depth (2.25 m)56.25 mm2.2146 in
cBottom clearance (0.25 m)6.25 mm0.2461 in
DPEquivalent diametral pitch (25.4/m)1.02
Nearest standard DP1

Also known as

M25MOD25

All gear modules

Compare all 37 modules in the Gear Modules chart →

Sources

  1. ISO 54:1996, Cylindrical gears for general engineering and for heavy engineering: Modules
  2. ISO 53:1998, Cylindrical gears for general and heavy engineering: Standard basic rack tooth profile
  3. DIN 780-1: Series of modules for gears (modules below 1 mm)
  4. KHK Gear Technical Reference: Module sizes and tooth profile

Values last checked against these sources on November 15, 2026. · How we check data

Reference values for planning and identification. Confirm critical dimensions with the manufacturer's drawing or the current edition of the standard before production.