Module 22 Gear Dimensions

Gear Modules · ISO 54 modules, series I and II

A Module 22 gear has a circular pitch of 69.115 mm (2.7211 in) and a whole tooth depth of 49.5 mm (1.9488 in), addendum 22 mm (0.8661 in), dedendum 27.5 mm (1.0827 in) on the ISO 53 basic rack with a 20° pressure angle. Pitch diameter = number of teeth × 22 mm. The equivalent diametral pitch is 1.15. The nearest inch gear, 1.25 DP, does not mesh with it.

mModule
22 mm0.8661 in0.8661 in22 mm
pCircular pitch (πm)
69.115 mm2.7211 in2.7211 in69.115 mm
hWhole depth (2.25 m)
49.5 mm1.9488 in1.9488 in49.5 mm
DPEquivalent diametral pitch (25.4/m)
1.15

Drawing

Pitch linep 69.115 mmp 2.7211 ins 34.558 mms 1.3605 inh 49.5 mmh 1.9488 inha 22 mmha 0.8661 inhf 27.5 mmhf 1.0827 in20°
Tip circlePitch circleBase circleRoot circle20-tooth gear, involute flanks
Proportions shown, not to scale · Dimensions in mmDimensions in inches

Module 22 specifications

mModule22 mm0.8661 in
SeriesII
pCircular pitch (πm)69.115 mm2.7211 in
sTooth thickness (πm/2)34.558 mm1.3605 in
haAddendum (1 m)22 mm0.8661 in
hfDedendum (1.25 m)27.5 mm1.0827 in
hWhole depth (2.25 m)49.5 mm1.9488 in
cBottom clearance (0.25 m)5.5 mm0.2165 in
DPEquivalent diametral pitch (25.4/m)1.15
Nearest standard DP1.25

Also known as

M22MOD22

All gear modules

Compare all 37 modules in the Gear Modules chart →

Sources

  1. ISO 54:1996, Cylindrical gears for general engineering and for heavy engineering: Modules
  2. ISO 53:1998, Cylindrical gears for general and heavy engineering: Standard basic rack tooth profile
  3. DIN 780-1: Series of modules for gears (modules below 1 mm)
  4. KHK Gear Technical Reference: Module sizes and tooth profile

Values last checked against these sources on November 15, 2026. · How we check data

Reference values for planning and identification. Confirm critical dimensions with the manufacturer's drawing or the current edition of the standard before production.