Glass Thickness Chart: Standard Sizes, Weight and Uses
Standard thicknesses of flat (float) glass, their US fractional names, weight per area and typical uses. Two facts cover most questions: glass weighs 2.5 kg/m² per millimetre of thickness (about 0.51 lb/ft² per millimetre, about 1.5 lb/ft² for 1/8 in), and US "1/4-inch" glass is really made to 6 mm.
Size chartSort by any column, or filter to find a row
| Nominal | tThicknessmmin | US designation (ASTM C1036) | Weight per areakg/m²lb/ft² | Typical uses |
|---|---|---|---|---|
| 2 mm | 20.079 | — | 51.02 | Picture frames, small cabinet doors, clocks |
| 2.5 mm | 2.50.098 | 3/32" | 6.251.28 | "Single strength": picture frames, small window lites |
| 3 mm | 30.118 | 1/8" | 7.51.54 | "Double strength": windows, insulated glass units, frames |
| 4 mm | 40.157 | 5/32" | 102.05 | Windows and IGU panes, cabinet doors, display cases |
| 5 mm | 50.197 | 3/16" | 12.52.56 | Larger windows, shelving, glass doors in furniture |
| 6 mm | 60.236 | 1/4" | 153.07 | Tabletops, shelves, patio doors, storefronts, IGU panes |
| 8 mm | 80.315 | 5/16" | 204.10 | Shower doors and screens, balustrade infill, tabletops |
| 10 mm | 100.394 | 3/8" | 255.12 | Frameless shower enclosures, glass doors, heavy tabletops |
| 12 mm | 120.472 | 1/2" | 306.14 | Frameless doors and partitions, balustrades, counters |
| 15 mm | 150.591 | — | 37.57.68 | Large tabletops, aquariums, structural railings |
| 16 mm | 160.630 | 5/8" | 408.19 | Large tabletops, aquariums, structural railings |
| 19 mm | 190.748 | 3/4" | 47.59.73 | Glass fins and beams, large aquariums (laminated) |
| 22 mm | 220.866 | 7/8" | 5511.26 | Glass fins and beams, large aquariums (laminated) |
| 25 mm | 250.984 | 1" | 62.512.80 | Floors and stair treads, structural glazing (laminated) |
No exact match. The nearest sizes:
Nominal thickness, US names and how to measure
Float glass is made to metric nominal thicknesses (EN 572): 2, 3, 4, 5, 6, 8, 10, 12, 15, 19 and 25 mm. The US standard ASTM C1036 gives each one a fractional name: 1/8" = 3 mm, 3/16" = 5 mm, 1/4" = 6 mm, 3/8" = 10 mm, 1/2" = 12 mm, 3/4" = 19 mm, with tolerances that put the actual glass close to the metric value. Old US names: "single strength" (SS) is 3/32 in (2.5 mm), "double strength" (DS) is 1/8 in (3 mm).
To measure installed glass, use a caliper on an exposed edge, or a glass thickness gauge from one side (it reads the reflections from both surfaces). Expect small deviations: EN 572 allows ±0.2 mm for 2–6 mm glass, ±0.3 mm for 8–12 mm, ±0.5 mm for 15 mm and ±1 mm for 19 and 25 mm.
The thickness alone does not say whether glass is tempered (toughened) or laminated. Tempered glass carries an etched mark in a corner; laminated glass shows a plastic interlayer line at the edge. Tempering does not change the thickness.
About Glass Thickness
Weight per area follows from the density of soda-lime glass, 2500 kg/m³: 4 mm glass is 10 kg/m² (2.05 lb/ft²), 6 mm is 15 kg/m² (3.07 lb/ft²), 10 mm is 25 kg/m². A 1 × 2 m pane of 10 mm glass weighs 50 kg (110 lb), so plan the lifting and the hinges accordingly.
Thickness is chosen for wind load, span and impact, not by habit. Building codes (IBC section 2406 and IRC section R308 in the US, national rules elsewhere) require safety glazing (tempered or laminated) in doors, next to doors, in showers and bathtub enclosures, near floors and in railings. Shower doors are typically 8 or 10 mm tempered (5/16 or 3/8 in), frameless doors 10–12 mm.
Tempered glass cannot be cut, drilled or edged after tempering; all holes and notches are made first. Laminated glass is named by its plies: 6.38 mm laminated is two 3 mm panes with a 0.38 mm PVB interlayer, 8.76 is 4 + 4 + 0.76. Interlayer thicknesses are multiples of 0.38 mm.
Insulated glass units (double glazing)
An insulated glass unit (IGU) is written pane – cavity – pane in millimetres: 4-16-4 is two 4 mm panes with a 16 mm gas-filled space, 24 mm overall. It is the most common European window unit. In the US the standard residential unit is about 3/4 in or 1 in overall, e.g. 1/8 in + 1/2 in space + 1/8 in, or for commercial glazing 1/4 in + 1/2 in + 1/4 in = 1 in. Triple glazing such as 4-12-4-12-4 is 36 mm overall.
When replacing an IGU, measure the overall thickness at the edge and the pane thicknesses if visible; the frame rebate and glazing beads are made for one overall thickness, typically within ±1 mm.
Questions
How thick is standard window glass?
3 or 4 mm (1/8 or 5/32 in) per pane for most residential windows; larger panes use 5 or 6 mm. Double-glazed units are typically 4-16-4 mm (24 mm overall) in Europe and 3/4 to 1 in overall in the US.
How much does glass weigh per square foot?
3 mm (1/8 in) glass weighs 7.5 kg/m² (1.54 lb/ft²); 6 mm (1/4 in) 15 kg/m² (3.07 lb/ft²); 12 mm (1/2 in) 30 kg/m² (6.14 lb/ft²). Rule of thumb: 2.5 kg/m² for every millimetre of thickness.
Is 1/4 inch glass the same as 6 mm?
Yes, in practice. ASTM C1036 maps the 1/4 in designation to 6 mm nominal, so US 1/4 in glass measures close to 6 mm (0.236 in), not the full 6.35 mm.
What thickness glass for a tabletop?
6 mm (1/4 in) for small tables and covers on a solid base; 10–12 mm (3/8–1/2 in) for free-spanning tabletops on legs or a pedestal. Use tempered glass and polished edges.
What thickness is shower door glass?
Framed shower doors use 6 mm (1/4 in) tempered; semi-frameless 8 mm (5/16 in); frameless doors 10 mm (3/8 in), heavy frameless 12 mm (1/2 in). All must be safety glazing.
Sources
- EN 572-1/-2: Glass in building, basic soda lime silicate glass products: float glass (nominal thicknesses, density)
- ASTM C1036: Standard Specification for Flat Glass (thickness designations)
- Glass Association of North America (GANA): Glazing Manual, glass thickness and weight
Values last checked against these sources on November 15, 2026. · How we check data
Reference values for planning and identification. Confirm critical dimensions with the manufacturer's drawing or the current edition of the standard before production.